sys/stat.h - data returned by the stat() function
The <sys/stat.h> header shall define the structure of the data returned by the fstat(), lstat(), and stat() functions.
The <sys/stat.h> header shall define the stat structure, which shall include at least the following members:dev_t st_dev Device ID of device containing file. ino_t st_ino File serial number. mode_t st_mode Mode of file (see below). nlink_t st_nlink Number of hard links to the file. uid_t st_uid User ID of file. gid_t st_gid Group ID of file. [XSI] dev_t st_rdev Device ID (if file is character or block special). off_t st_size For regular files, the file size in bytes. For symbolic links, the length in bytes of the pathname contained in the symbolic link. [SHM] For a shared memory object, the length in bytes. [TYM] For a typed memory object, the length in bytes. For other file types, the use of this field is unspecified. struct timespec st_atim Last data access timestamp. struct timespec st_mtim Last data modification timestamp. struct timespec st_ctim Last file status change timestamp. [XSI] blksize_t st_blksize A file system-specific preferred I/O block size for this object. In some file system types, this may vary from file to file. blkcnt_t st_blocks Number of blocks allocated for this object.
The st_ino and st_dev fields taken together uniquely identify the file within the system.
The <sys/stat.h> header shall define the blkcnt_t, blksize_t, dev_t, ino_t, mode_t, nlink_t, uid_t, gid_t, off_t, and time_t types as described in <sys/types.h>.
The <sys/stat.h> header shall define the timespec structure as described in <time.h>. Times shall be given in seconds since the Epoch.
Which structure members have meaningful values depends on the type of file. For further information, see the descriptions of fstat(), lstat(), and stat() in the System Interfaces volume of POSIX.1-2008.
For compatibility with earlier versions of this standard, the st_atime macro shall be defined with the value st_atim.tv_sec. Similarly, st_ctime and st_mtime shall be defined as macros with the values st_ctim.tv_sec and st_mtim.tv_sec, respectively.
The <sys/stat.h> header shall define the following symbolic constants for the file types encoded in type mode_t. The values shall be suitable for use in #if preprocessing directives:
- [XSI] Type of file.
- Block special.
- Character special.
- FIFO special.
- Symbolic link.
The <sys/stat.h> header shall define the following symbolic constants for the file mode bits encoded in type mode_t, with the indicated numeric values. These macros shall expand to an expression which has a type that allows them to be used, either singly or OR'ed together, as the third argument to open() without the need for a mode_t cast. The values shall be suitable for use in #if preprocessing directives.
Read, write, execute/search by owner.
Read permission, owner.
Write permission, owner.
Execute/search permission, owner.
Read, write, execute/search by group.
Read permission, group.
Write permission, group.
Execute/search permission, group.
Read, write, execute/search by others.
Read permission, others.
Write permission, others.
Execute/search permission, others.
Set-user-ID on execution.
Set-group-ID on execution.
On directories, restricted deletion flag.
The following macros shall be provided to test whether a file is of the specified type. The value m supplied to the macros is the value of st_mode from a stat structure. The macro shall evaluate to a non-zero value if the test is true; 0 if the test is false.
- Test for a block special file.
- Test for a character special file.
- Test for a directory.
- Test for a pipe or FIFO special file.
- Test for a regular file.
- Test for a symbolic link.
- Test for a socket.
The implementation may implement message queues, semaphores, or shared memory objects as distinct file types. The following macros shall be provided to test whether a file is of the specified type. The value of the buf argument supplied to the macros is a pointer to a stat structure. The macro shall evaluate to a non-zero value if the specified object is implemented as a distinct file type and the specified file type is contained in the stat structure referenced by buf. Otherwise, the macro shall evaluate to zero.
- Test for a message queue.
- Test for a semaphore.
- Test for a shared memory object.
[TYM] The implementation may implement typed memory objects as distinct file types, and the following macro shall test whether a file is of the specified type. The value of the buf argument supplied to the macros is a pointer to a stat structure. The macro shall evaluate to a non-zero value if the specified object is implemented as a distinct file type and the specified file type is contained in the stat structure referenced by buf. Otherwise, the macro shall evaluate to zero.
- Test macro for a typed memory object.
The <sys/stat.h> header shall define the following symbolic constants as distinct integer values outside of the range [0,999999999], for use with the futimens() and utimensat() functions: UTIME_NOW UTIME_OMIT
The following shall be declared as functions and may also be defined as macros. Function prototypes shall be provided.int chmod(const char *, mode_t); int fchmod(int, mode_t); int fchmodat(int, const char *, mode_t, int); int fstat(int, struct stat *); int fstatat(int, const char *restrict, struct stat *restrict, int); int futimens(int, const struct timespec ); int lstat(const char *restrict, struct stat *restrict); int mkdir(const char *, mode_t); int mkdirat(int, const char *, mode_t); int mkfifo(const char *, mode_t); int mkfifoat(int, const char *, mode_t); [XSI] int mknod(const char *, mode_t, dev_t); int mknodat(int, const char *, mode_t, dev_t); int stat(const char *restrict, struct stat *restrict); mode_t umask(mode_t); int utimensat(int, const char *, const struct timespec , int);
Use of the macros is recommended for determining the type of a file.
A conforming C-language application must include <sys/stat.h> for functions that have arguments or return values of type mode_t, so that symbolic values for that type can be used. An alternative would be to require that these constants are also defined by including <sys/types.h>.
The S_ISUID and S_ISGID bits may be cleared on any write, not just on open(), as some historical implementations do.
System calls that update the time entry fields in the stat structure must be documented by the implementors. POSIX-conforming systems should not update the time entry fields for functions listed in the System Interfaces volume of POSIX.1-2008 unless the standard requires that they do, except in the case of documented extensions to the standard.
Upon assignment, file timestamps are immediately converted to the resolution of the file system by truncation (i.e., the recorded time can be older than the actual time). For example, if the file system resolution is 1 microsecond, then a conforming stat() must always return an st_mtim.tv_nsec that is a multiple of 1000. Some older implementations returned higher-resolution timestamps while the inode information was cached, and then spontaneously truncated the tv_nsec fields when they were stored to and retrieved from disk, but this behavior does not conform.
Note that st_dev must be unique within a Local Area Network (LAN) in a ``system'' made up of multiple computers' file systems connected by a LAN.
Networked implementations of a POSIX-conforming system must guarantee that all files visible within the file tree (including parts of the tree that may be remotely mounted from other machines on the network) on each individual processor are uniquely identified by the combination of the st_ino and st_dev fields.
The unit for the st_blocks member of the stat structure is not defined within POSIX.1-2008. In some implementations it is 512 bytes. It may differ on a file system basis. There is no correlation between values of the st_blocks and st_blksize, and the f_bsize (from <sys/statvfs.h>) structure members.
Traditionally, some implementations defined the multiplier for st_blocks in <sys/param.h> as the symbol DEV_BSIZE.
Some earlier versions of this standard did not specify values for the file mode bit macros. The expectation was that some implementors might choose to use a different encoding for these bits than the traditional one, and that new applications would use symbolic file modes instead of numeric. This version of the standard specifies the traditional encoding, in recognition that nearly 20 years after the first publication of this standard numeric file modes are still in widespread use by application developers, and that all conforming implementations still use the traditional encoding.
No new S_IFMT symbolic names for the file type values of mode_t will be defined by POSIX.1-2008; if new file types are required, they will only be testable through S_ISxx() or S_TYPEISxxx() macros instead.
<sys/statvfs.h> , <sys/types.h> , <time.h>
XSH chmod , fchmod , fstat , fstatat , futimens , mkdir , mkfifo , mknod , umask
First released in Issue 1. Derived from Issue 1 of the SVID.
The DESCRIPTION is updated for alignment with the POSIX Realtime Extension.
The type of st_blksize is changed from long to blksize_t; the type of st_blocks is changed from long to blkcnt_t.
The S_TYPEISMQ(), S_TYPEISSEM(), and S_TYPEISSHM() macros are unconditionally mandated.
The Open Group Corrigendum U035/4 is applied. In the DESCRIPTION, the types blksize_t and blkcnt_t have been described.
The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:
The dev_t, ino_t, mode_t, nlink_t, uid_t, gid_t, off_t, and time_t types are mandated.
S_IFSOCK and S_ISSOCK are added for sockets.
The description of stat structure members is changed to reflect contents when file type is a symbolic link.
The test macro S_TYPEISTMO is added for alignment with IEEE Std 1003.1j-2000.
The restrict keyword is added to the prototypes for lstat() and stat().
The lstat() function is made mandatory.
IEEE Std 1003.1-2001/Cor 1-2002, item XBD/TC1/D6/17 is applied, adding text regarding the st_blocks member of the stat structure to the RATIONALE.
IEEE Std 1003.1-2001/Cor 2-2004, item XBD/TC2/D6/25 is applied, adding to the DESCRIPTION that the timespec structure may be defined as described in the <time.h> header.
SD5-XSH-ERN-161 is applied, updating the DESCRIPTION to clarify that the descriptions of the interfaces should be consulted in order to determine which structure members have meaningful values.
The fchmodat(), fstatat(), mkdirat(), mkfifoat(), mknodat(), and utimensat() functions are added from The Open Group Technical Standard, 2006, Extended API Set Part 2.
The futimens() function is added.
This reference page is clarified with respect to macros and symbolic constants.
Changes are made related to support for finegrained timestamps and the UTIME_NOW and UTIME_OMIT symbolic constants are added.
return to top of page