The Open Group Base Specifications Issue 7, 2018 edition
IEEE Std 1003.1-2017 (Revision of IEEE Std 1003.1-2008)
Copyright © 2001-2018 IEEE and The Open Group

NAME

fopen - open a stream

SYNOPSIS

#include <stdio.h>

FILE *fopen(const char *restrict
pathname, const char *restrict mode);

DESCRIPTION

[CX] [Option Start] The functionality described on this reference page is aligned with the ISO C standard. Any conflict between the requirements described here and the ISO C standard is unintentional. This volume of POSIX.1-2017 defers to the ISO C standard. [Option End]

The fopen() function shall open the file whose pathname is the string pointed to by pathname, and associates a stream with it.

The mode argument points to a string. If the string is one of the following, the file shall be opened in the indicated mode. Otherwise, the behavior is undefined.

r or rb
Open file for reading.
w or wb
Truncate to zero length or create file for writing.
a or ab
Append; open or create file for writing at end-of-file.
r+ or rb+ or r+b
Open file for update (reading and writing).
w+ or wb+ or w+b
Truncate to zero length or create file for update.
a+ or ab+ or a+b
Append; open or create file for update, writing at end-of-file.

[CX] [Option Start] The character 'b' shall have no effect, but is allowed for ISO C standard conformance. [Option End] Opening a file with read mode (r as the first character in the mode argument) shall fail if the file does not exist or cannot be read.

Opening a file with append mode (a as the first character in the mode argument) shall cause all subsequent writes to the file to be forced to the then current end-of-file, regardless of intervening calls to fseek().

When a file is opened with update mode ( '+' as the second or third character in the mode argument), both input and output may be performed on the associated stream. However, the application shall ensure that output is not directly followed by input without an intervening call to fflush() or to a file positioning function (fseek(), fsetpos(), or rewind()), and input is not directly followed by output without an intervening call to a file positioning function, unless the input operation encounters end-of-file.

When opened, a stream is fully buffered if and only if it can be determined not to refer to an interactive device. The error and end-of-file indicators for the stream shall be cleared.

[CX] [Option Start] If mode is w, wb, a, ab, w+, wb+, w+b, a+, ab+, or a+b, and the file did not previously exist, upon successful completion, fopen() shall mark for update the last data access, last data modification, and last file status change timestamps of the file and the last file status change and last data modification timestamps of the parent directory.

If mode is w, wb, a, ab, w+, wb+, w+b, a+, ab+, or a+b, and the file did not previously exist, the fopen() function shall create a file as if it called the creat() function with a value appropriate for the path argument interpreted from pathname and a value of S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH for the mode argument.

If mode is w, wb, w+, wb+, or w+b, and the file did previously exist, upon successful completion, fopen() shall mark for update the last data modification and last file status change timestamps of the file. [Option End]

After a successful call to the fopen() function, the orientation of the stream shall be cleared, [XSI] [Option Start]  the encoding rule shall be cleared, [Option End] and the associated mbstate_t object shall be set to describe an initial conversion state.

[CX] [Option Start] The file descriptor associated with the opened stream shall be allocated and opened as if by a call to open() with the following flags:

fopen() Mode

open() Flags

r or rb

O_RDONLY

w or wb

O_WRONLY|O_CREAT|O_TRUNC

a or ab

O_WRONLY|O_CREAT|O_APPEND

r+ or rb+ or r+b

O_RDWR

w+ or wb+ or w+b

O_RDWR|O_CREAT|O_TRUNC

a+ or ab+ or a+b

O_RDWR|O_CREAT|O_APPEND

[Option End]

RETURN VALUE

Upon successful completion, fopen() shall return a pointer to the object controlling the stream. Otherwise, a null pointer shall be returned, [CX] [Option Start]  and errno shall be set to indicate the error. [Option End]

ERRORS

The fopen() function shall fail if:

[EACCES]
[CX] [Option Start] Search permission is denied on a component of the path prefix, or the file exists and the permissions specified by mode are denied, or the file does not exist and write permission is denied for the parent directory of the file to be created. [Option End]
[EINTR]
[CX] [Option Start] A signal was caught during fopen(). [Option End]
[EISDIR]
[CX] [Option Start] The named file is a directory and mode requires write access. [Option End]
[ELOOP]
[CX] [Option Start] A loop exists in symbolic links encountered during resolution of the path argument. [Option End]
[EMFILE]
[CX] [Option Start] All file descriptors available to the process are currently open. [Option End]
[EMFILE]
[CX] [Option Start] {STREAM_MAX} streams are currently open in the calling process. [Option End]
[ENAMETOOLONG]
[CX] [Option Start]
The length of a pathname exceeds {PATH_MAX}, or pathname resolution of a symbolic link produced an intermediate result with a length that exceeds {PATH_MAX}. [Option End]
[ENFILE]
[CX] [Option Start] The maximum allowable number of files is currently open in the system. [Option End]
[ENOENT]
[CX] [Option Start] The mode string begins with 'r' and a component of pathname does not name an existing file, or mode begins with 'w' or 'a' and a component of the path prefix of pathname does not name an existing file, or pathname is an empty string. [Option End]
[ENOENT] or [ENOTDIR]
[CX] [Option Start]
The pathname argument contains at least one non- <slash> character and ends with one or more trailing <slash> characters. If pathname without the trailing <slash> characters would name an existing file, an [ENOENT] error shall not occur. [Option End]
[ENOSPC]
[CX] [Option Start] The directory or file system that would contain the new file cannot be expanded, the file does not exist, and the file was to be created. [Option End]
[ENOTDIR]
[CX] [Option Start] A component of the path prefix names an existing file that is neither a directory nor a symbolic link to a directory, or the pathname argument contains at least one non- <slash> character and ends with one or more trailing <slash> characters and the last pathname component names an existing file that is neither a directory nor a symbolic link to a directory. [Option End]
[ENXIO]
[CX] [Option Start] The named file is a character special or block special file, and the device associated with this special file does not exist. [Option End]
[EOVERFLOW]
[CX] [Option Start] The named file is a regular file and the size of the file cannot be represented correctly in an object of type off_t. [Option End]
[EROFS]
[CX] [Option Start] The named file resides on a read-only file system and mode requires write access. [Option End]

The fopen() function may fail if:

[EINVAL]
[CX] [Option Start] The value of the mode argument is not valid. [Option End]
[ELOOP]
[CX] [Option Start] More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the path argument. [Option End]
[EMFILE]
[CX] [Option Start] {FOPEN_MAX} streams are currently open in the calling process. [Option End]
[ENAMETOOLONG]
[CX] [Option Start]
The length of a component of a pathname is longer than {NAME_MAX}. [Option End]
[ENOMEM]
[CX] [Option Start] Insufficient storage space is available. [Option End]
[ETXTBSY]
[CX] [Option Start] The file is a pure procedure (shared text) file that is being executed and mode requires write access. [Option End]

The following sections are informative.

EXAMPLES

Opening a File

The following example tries to open the file named file for reading. The fopen() function returns a file pointer that is used in subsequent fgets() and fclose() calls. If the program cannot open the file, it just ignores it.

#include <stdio.h>
...
FILE *fp;
...
void rgrep(const char *file)
{
...
    if ((fp = fopen(file, "r")) == NULL)
        return;
...
}

APPLICATION USAGE

None.

RATIONALE

None.

FUTURE DIRECTIONS

None.

SEE ALSO

Standard I/O Streams, creat, fclose, fdopen, fmemopen, freopen, open_memstream

XBD <stdio.h>

CHANGE HISTORY

First released in Issue 1. Derived from Issue 1 of the SVID.

Issue 5

Large File Summit extensions are added.

Issue 6

Extensions beyond the ISO C standard are marked.

The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:

The normative text is updated to avoid use of the term "must" for application requirements.

The following changes are made for alignment with the ISO/IEC 9899:1999 standard:

The wording of the mandatory [ELOOP] error condition is updated, and a second optional [ELOOP] error condition is added.

Issue 7

Austin Group Interpretation 1003.1-2001 #025 is applied, clarifying the file creation mode.

Austin Group Interpretation 1003.1-2001 #143 is applied.

Austin Group Interpretation 1003.1-2001 #159 is applied, clarifying requirements for the flags set on the open file description.

SD5-XBD-ERN-4 is applied, changing the definition of the [EMFILE] error.

SD5-XSH-ERN-149 is applied, changing the {STREAM_MAX} [EMFILE] error condition from a "may fail" to a "shall fail".

Changes are made related to support for finegrained timestamps.

POSIX.1-2008, Technical Corrigendum 1, XSH/TC1-2008/0156 [291,433], XSH/TC1-2008/0157 [146,433], XSH/TC1-2008/0158 [324], and XSH/TC1-2008/0159 [14] are applied.

POSIX.1-2008, Technical Corrigendum 2, XSH/TC2-2008/0122 [822] is applied.

End of informative text.

 

return to top of page

UNIX ® is a registered Trademark of The Open Group.
POSIX ™ is a Trademark of The IEEE.
Copyright © 2001-2018 IEEE and The Open Group, All Rights Reserved
[ Main Index | XBD | XSH | XCU | XRAT ]