The Open Group Base Specifications Issue 7, 2018 edition
IEEE Std 1003.1-2017 (Revision of IEEE Std 1003.1-2008)
Copyright © 2001-2018 IEEE and The Open Group

NAME

semctl - XSI semaphore control operations

SYNOPSIS

[XSI] [Option Start] #include <sys/sem.h>

int semctl(int
semid, int semnum, int cmd, ...); [Option End]

DESCRIPTION

The semctl() function operates on XSI semaphores (see XBD Semaphore). It is unspecified whether this function interoperates with the realtime interprocess communication facilities defined in Realtime.

The semctl() function provides a variety of semaphore control operations as specified by cmd. The fourth argument is optional and depends upon the operation requested. If required, it is of type union semun, which the application shall explicitly declare:

union semun {
    int val;
    struct semid_ds *buf;
    unsigned short  *array;
} arg;

Each operation shall be performed atomically.

The following semaphore control operations as specified by cmd are executed with respect to the semaphore specified by semid and semnum. The level of permission required for each operation is shown with each command; see XSI Interprocess Communication. The symbolic names for the values of cmd are defined in the <sys/sem.h> header:

GETVAL
Return the value of semval; see <sys/sem.h>. Requires read permission.
SETVAL
Set the value of semval to arg.val, where arg is the value of the fourth argument to semctl(). When this command is successfully executed, the semadj value corresponding to the specified semaphore in all processes is cleared. Also, the sem_ctime timestamp shall be set to the current time, as described in IPC General Description. Requires alter permission; see XSI Interprocess Communication.
GETPID
Return the value of sempid. Requires read permission.
GETNCNT
Return the value of semncnt. Requires read permission.
GETZCNT
Return the value of semzcnt. Requires read permission.

The following values of cmd operate on each semval in the set of semaphores:

GETALL
Return the value of semval for each semaphore in the semaphore set and place into the array pointed to by arg.array, where arg is the fourth argument to semctl(). Requires read permission.
SETALL
Set the value of semval for each semaphore in the semaphore set according to the array pointed to by arg.array, where arg is the fourth argument to semctl(). When this command is successfully executed, the semadj values corresponding to each specified semaphore in all processes are cleared. Also, the sem_ctime timestamp shall be set to the current time, as described in IPC General Description. Requires alter permission.

The following values of cmd are also available:

IPC_STAT
Place the current value of each member of the semid_ds data structure associated with semid into the structure pointed to by arg.buf, where arg is the fourth argument to semctl(). The contents of this structure are defined in <sys/sem.h>. Requires read permission.
IPC_SET
Set the value of the following members of the semid_ds data structure associated with semid to the corresponding value found in the structure pointed to by arg.buf, where arg is the fourth argument to semctl():
sem_perm.uid
sem_perm.gid
sem_perm.mode

The mode bits specified in IPC General Description are copied into the corresponding bits of the sem_perm.mode associated with semid. The stored values of any other bits are unspecified. The sem_ctime timestamp shall be set to the current time, as described in IPC General Description.

This command can only be executed by a process that has an effective user ID equal to either that of a process with appropriate privileges or to the value of sem_perm.cuid or sem_perm.uid in the semid_ds data structure associated with semid.

IPC_RMID
Remove the semaphore identifier specified by semid from the system and destroy the set of semaphores and semid_ds data structure associated with it. This command can only be executed by a process that has an effective user ID equal to either that of a process with appropriate privileges or to the value of sem_perm.cuid or sem_perm.uid in the semid_ds data structure associated with semid.

RETURN VALUE

If successful, the value returned by semctl() depends on cmd as follows:

GETVAL
The value of semval.
GETPID
The value of sempid.
GETNCNT
The value of semncnt.
GETZCNT
The value of semzcnt.
All others
0.

Otherwise, semctl() shall return -1 and set errno to indicate the error.

ERRORS

The semctl() function shall fail if:

[EACCES]
Operation permission is denied to the calling process; see XSI Interprocess Communication.
[EINVAL]
The value of semid is not a valid semaphore identifier, or the value of semnum is less than 0 or greater than or equal to sem_nsems, or the value of cmd is not a valid command.
[EPERM]
The argument cmd is equal to IPC_RMID or IPC_SET and the effective user ID of the calling process is not equal to that of a process with appropriate privileges and it is not equal to the value of sem_perm.cuid or sem_perm.uid in the data structure associated with semid.
[ERANGE]
The argument cmd is equal to SETVAL or SETALL and the value to which semval is to be set is greater than the system-imposed maximum.

The following sections are informative.

EXAMPLES

Refer to semop.

APPLICATION USAGE

The fourth parameter in the SYNOPSIS section is now specified as "..." in order to avoid a clash with the ISO C standard when referring to the union semun (as defined in Issue 3) and for backwards-compatibility.

The POSIX Realtime Extension defines alternative interfaces for interprocess communication. Application developers who need to use IPC should design their applications so that modules using the IPC routines described in XSI Interprocess Communication can be easily modified to use the alternative interfaces.

RATIONALE

None.

FUTURE DIRECTIONS

None.

SEE ALSO

XSI Interprocess Communication, Realtime, semget, semop, sem_close, sem_destroy, sem_getvalue, sem_init, sem_open, sem_post, sem_trywait, sem_unlink

XBD Semaphore, <sys/sem.h>

CHANGE HISTORY

First released in Issue 2. Derived from Issue 2 of the SVID.

Issue 5

The note about use of POSIX Realtime Extension IPC routines has been moved from FUTURE DIRECTIONS to the APPLICATION USAGE section.

Issue 7

POSIX.1-2008, Technical Corrigendum 1, XSH/TC1-2008/0532 [345], XSH/TC1-2008/0533 [345], XSH/TC1-2008/0534 [345], and XSH/TC1-2008/0535 [335] are applied.

POSIX.1-2008, Technical Corrigendum 2, XSH/TC2-2008/0319 [532] is applied.

End of informative text.

 

return to top of page

UNIX ® is a registered Trademark of The Open Group.
POSIX ™ is a Trademark of The IEEE.
Copyright © 2001-2018 IEEE and The Open Group, All Rights Reserved
[ Main Index | XBD | XSH | XCU | XRAT ]