The Open Group Base Specifications Issue 7, 2018 edition
IEEE Std 1003.1-2017 (Revision of IEEE Std 1003.1-2008)
Copyright © 2001-2018 IEEE and The Open Group

NAME

prs - print an SCCS file (DEVELOPMENT)

SYNOPSIS

[XSI] [Option Start] prs [-a] [-d dataspec] [-r[SID]] file...

prs
[-e|-l] -c cutoff [-d dataspec] file...

prs
[-e|-l] -r[SID] [-d dataspec] file... [Option End]

DESCRIPTION

The prs utility shall write to standard output parts or all of an SCCS file in a user-supplied format.

OPTIONS

The prs utility shall conform to XBD Utility Syntax Guidelines , except that the -r option has an optional option-argument. This optional option-argument cannot be presented as a separate argument. The following options shall be supported:

-d  dataspec
Specify the output data specification. The dataspec shall be a string consisting of SCCS file data keywords (see Data Keywords) interspersed with optional user-supplied text.
-r[SID]
Specify the SCCS identification string (SID) of a delta for which information is desired. If no SID option-argument is specified, the SID of the most recently created delta shall be assumed.
-e
Request information for all deltas created earlier than and including the delta designated via the -r option or the date-time given by the -c option.
-l
Request information for all deltas created later than and including the delta designated via the -r option or the date-time given by the -c option.
-c  cutoff
Indicate the cutoff date-time, in the form:
YY[MM[DD[HH[MM[SS]]]]]

For the YY component, values in the range [69,99] shall refer to years 1969 to 1999 inclusive, and values in the range [00,68] shall refer to years 2000 to 2068 inclusive.

Note:
It is expected that in a future version of this standard the default century inferred from a 2-digit year will change. (This would apply to all commands accepting a 2-digit year as input.)

No changes (deltas) to the SCCS file that were created after the specified cutoff date-time shall be included in the output. Units omitted from the date-time default to their maximum possible values; for example, -c 7502 is equivalent to -c 750228235959.

-a
Request writing of information for both removed-that is, delta type= R (see rmdel)- and existing-that is, delta type= D,- deltas. If the -a option is not specified, information for existing deltas only shall be provided.

OPERANDS

The following operand shall be supported:

file
A pathname of an existing SCCS file or a directory. If file is a directory, the prs utility shall behave as though each file in the directory were specified as a named file, except that non-SCCS files (last component of the pathname does not begin with s.) and unreadable files shall be silently ignored.

If exactly one file operand appears, and it is '-', the standard input shall be read; each line of the standard input shall be taken to be the name of an SCCS file to be processed. Non-SCCS files and unreadable files shall be silently ignored.

STDIN

The standard input shall be a text file used only when the file operand is specified as '-'. Each line of the text file shall be interpreted as an SCCS pathname.

INPUT FILES

Any SCCS files displayed are files of an unspecified format.

ENVIRONMENT VARIABLES

The following environment variables shall affect the execution of prs:

LANG
Provide a default value for the internationalization variables that are unset or null. (See XBD Internationalization Variables the precedence of internationalization variables used to determine the values of locale categories.)
LC_ALL
If set to a non-empty string value, override the values of all the other internationalization variables.
LC_CTYPE
Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multi-byte characters in arguments and input files).
LC_MESSAGES
Determine the locale that should be used to affect the format and contents of diagnostic messages written to standard error.
NLSPATH
Determine the location of message catalogs for the processing of LC_MESSAGES.

ASYNCHRONOUS EVENTS

Default.

STDOUT

The standard output shall be a text file whose format is dependent on the data keywords specified with the -d option.

Data Keywords

Data keywords specify which parts of an SCCS file shall be retrieved and output. All parts of an SCCS file have an associated data keyword. A data keyword may appear in a dataspec multiple times.

The information written by prs shall consist of:

  1. The user-supplied text

  2. Appropriate values (extracted from the SCCS file) substituted for the recognized data keywords in the order of appearance in the dataspec

The format of a data keyword value shall either be simple ( 'S' ), in which keyword substitution is direct, or multi-line ( 'M' ).

User-supplied text shall be any text other than recognized data keywords. A <tab> shall be specified by '\t' and <newline> by '\n'. When the -r option is not specified, the default dataspec shall be:

:PN::\n\n

and the following dataspec shall be used for each selected delta:

:Dt:\t:DL:\nMRs:\n:MR:COMMENTS:\n:C:

SCCS File Data Keywords

Keyword

Data Item

File Section

Value

Format

:Dt:

Delta information

Delta Table

See below*

S

:DL:

Delta line statistics

"

:Li:/:Ld:/:Lu:

S

:Li:

Lines inserted by Delta

"

nnnnn***

S

:Ld:

Lines deleted by Delta

"

nnnnn***

S

:Lu:

Lines unchanged by Delta

"

nnnnn***

S

:DT:

Delta type

"

D or R

S

:I:

SCCS ID string (SID)

"

See below**

S

:R:

Release number

"

nnnn

S

:L:

Level number

"

nnnn

S

:B:

Branch number

"

nnnn

S

:S:

Sequence number

"

nnnn

S

:D:

Date delta created

"

:Dy:/:Dm:/:Dd:

S

:Dy:

Year delta created

"

nn

S

:Dm:

Month delta created

"

nn

S

:Dd:

Day delta created

"

nn

S

:T:

Time delta created

"

:Th:::Tm:::Ts:

S

:Th:

Hour delta created

"

nn

S

:Tm:

Minutes delta created

"

nn

S

:Ts:

Seconds delta created

"

nn

S

:P:

Programmer who created Delta

"

logname

S

:DS:

Delta sequence number

"

nnnn

S

:DP:

Predecessor Delta sequence

"

nnnn

S

 

number

 

 

 

:DI:

Sequence number of deltas

"

:Dn:/:Dx:/:Dg:

S

 

included, excluded, or ignored

 

 

 

:Dn:

Deltas included (sequence #)

"

:DS: :DS: ...

S

:Dx:

Deltas excluded (sequence #)

"

:DS: :DS: ...

S

:Dg:

Deltas ignored (sequence #)

"

:DS: :DS: ...

S

:MR:

MR numbers for delta

"

text

M

:C:

Comments for delta

"

text

M

:UN:

User names

User Names

text

M

:FL:

Flag list

Flags

text

M

:Y:

Module type flag

"

text

S

:MF:

MR validation flag

"

yes or no

S

:MP:

MR validation program name

"

text

S

:KF:

Keyword error, warning flag

"

yes or no

S

:KV:

Keyword validation string

"

text

S

:BF:

Branch flag

"

yes or no

S

:J:

Joint edit flag

"

yes or no

S

:LK:

Locked releases

"

:R: ...

S

:Q:

User-defined keyword

"

text

S

:M:

Module name

"

text

S

:FB:

Floor boundary

"

:R:

S

:CB:

Ceiling boundary

"

:R:

S

:Ds:

Default SID

"

:I:

S

:ND:

Null delta flag

"

yes or no

S

:FD:

File descriptive text

Comments

text

M

:BD:

Body

Body

text

M

:GB:

Gotten body

"

text

M

:W:

A form of what string

N/A

:Z::M:\t:I:

S

:A:

A form of what string

N/A

:Z::Y: :M: :I::Z:

S

:Z:

what string delimiter

N/A

@(#)

S

:F:

SCCS filename

N/A

text

S

:PN:

SCCS file pathname

N/A

text

S

*
:Dt:= :DT: :I: :D: :T: :P: :DS: :DP:
**
:R:.:L:.:B:.:S: if the delta is a branch delta (:BF:== yes)
:R:.:L: if the delta is not a branch delta (:BF:== no)
***
The line statistics are capped at 99999. For example, if 100000 lines were unchanged in a certain revision, :Lu: shall produce the value 99999.

STDERR

The standard error shall be used only for diagnostic messages.

OUTPUT FILES

None.

EXTENDED DESCRIPTION

None.

EXIT STATUS

The following exit values shall be returned:

 0
Successful completion.
>0
An error occurred.

CONSEQUENCES OF ERRORS

Default.


The following sections are informative.

APPLICATION USAGE

None.

EXAMPLES

  1. The following example:

    prs -d "User Names for :F: are:\n:UN:" s.file
    
    

    might write to standard output:

    User Names for s.file are:
    xyz
    131
    abc
    
    
  2. The following example:

    prs -d "Delta for pgm :M:: :I: - :D: By :P:" -r s.file
    
    

    might write to standard output:

    Delta for pgm main.c: 3.7 - 77/12/01 By cas
    
    
  3. As a special case:

    prs s.file
    
    

    might write to standard output:

    s.file:
    <blank line>
    D 1.1 77/12/01 00:00:00 cas 1 000000/00000/00000
    MRs:
    bl78-12345
    bl79-54321
    COMMENTS:
    this is the comment line for s.file initial delta
    <blank line>
    
    

    for each delta table entry of the D type. The only option allowed to be used with this special case is the -a option.

RATIONALE

None.

FUTURE DIRECTIONS

None.

SEE ALSO

admin, delta, get, what

XBD Environment Variables, Utility Syntax Guidelines

CHANGE HISTORY

First released in Issue 2.

Issue 5

The phrase "in which keyword substitution is followed by a <newline>" is deleted from the end of the second paragraph of Data Keywords.

The interpretation of the YY component of the -c cutoff argument is noted.

Issue 6

The normative text is reworded to emphasize the term "shall" for implementation requirements.

The Open Group Base Resolution bwg2001-007 is applied, updating the table in STDOUT with a note that line statistics are capped at 99999 for the :Li:, :Ld:, :Lu:, and :DL: keywords.

The Open Group Interpretation PIN4C.00009 is applied.

Issue 7

SD5-XCU-ERN-97 is applied, updating the SYNOPSIS.

End of informative text.

 

return to top of page

UNIX ® is a registered Trademark of The Open Group.
POSIX ™ is a Trademark of The IEEE.
Copyright © 2001-2018 IEEE and The Open Group, All Rights Reserved
[ Main Index | XBD | XSH | XCU | XRAT ]