ArchiMate® 3.0 Specification
Copyright © 2012-2016 The Open Group

D                        Relationship to Other Standards (Informative)

This appendix describes the relationship of the ArchiMate language to other standards, including the TOGAF framework, UML, BPMN, and BMM.

D.1                   The TOGAF Framework

The ArchiMate language, as described in this standard, complements the TOGAF framework [4] in that it provides a vendor-independent set of concepts, including a graphical representation, that helps to create a consistent, integrated model “below the waterline”, which can be depicted in the form of TOGAF views.

The structure of the ArchiMate core language closely corresponds with the three main architectures as addressed in the TOGAF ADM. The strategy, motivation, implementation, and migration elements approximately map onto the remainder of the ADM (although these elements may also be used in Phases B, C, and D). This is illustrated in Figure 108. This correspondence indicates a fairly easy mapping between TOGAF views and the ArchiMate viewpoints. A more detailed description of this correspondence is given in [6].

Figure 108: Correspondence between the ArchiMate Language and the TOGAF ADM

Although some of the viewpoints that are defined in the TOGAF standard cannot easily be mapped onto ArchiMate viewpoints, the ArchiMate language and its analysis techniques support the concepts addressed in these viewpoints. While there is no one-to-one mapping between them, there is still a fair amount of correspondence between the ArchiMate viewpoints and the TOGAF viewpoints. Although corresponding viewpoints from the two standards do not necessarily have identical coverage, many viewpoints from both address largely the same issues. Moreover, the viewpoint mechanism described in Section 14.4 lends itself well to define TOGAF viewpoints using ArchiMate concepts.

Is it important to reiterate that the ArchiMate standard is a modeling language and not a framework, and therefore the viewpoint definitions are more detailed and they specify the stakeholders, concerns, level of detail, or abstraction level, and also the entity types involved in the viewpoints. In the TOGAF standard this is presented in a more general way, so sometimes there cannot be a one-to-one mapping between the entities and some interpretation or transformation will be required.

In conclusion, the TOGAF and ArchiMate standards can easily be used in conjunction:

          The two standards complement each other with respect to the definition of an architecture development process and the definition of an Enterprise Architecture modeling language.

          The two standards overlap in their use of viewpoints, and the concept of an underlying common repository of architectural artifacts and models; i.e., they have a firm common foundation.

          The combined use of the two standards can support a better communication with stakeholders.

See [6] for a detailed explanation of how the ArchiMate and TOGAF standards can be used together.

D.2                   The BPMN Standard

Both the ArchiMate language and BPMN [12] can be used for modeling business processes. Their aims are different, however. ArchiMate notation is typically used for high-level processes and their relations to the enterprise context, but is not intended for detailed workflow modeling, whereas BPMN supports detailed sub-process and task modeling down to the level of executable specifications, but lacks the broader enterprise context, for example, to model the application services that support a process or the goals and requirements it has to fulfill.

Both languages share the concepts of (business) process and event. In the ArchiMate notation there is a single business process element that may be decomposed in other processes that are related using flow and triggering relationships, possibly using junctions to represent more complex connections. BPMN has a more fine-grained set of elements, with various types of events, tasks, and gateways. Its metamodel also distinguishes explicitly between process and sub-process (although it lacks a graphical representation of a business process itself). The BPMN concept of participant (or pool) and the ArchiMate concepts of business role or business actor (or application component for automated processes) also correspond.

In a typical scenario, both languages can be used in conjunction. Mapping from ArchiMate notation down to BPMN is fairly straightforward. The other way around loses the detailed elements of BPMN. Moreover, there are structural differences between the languages that preclude a direct concept-to-concept mapping and may merit a pattern-based approach. A detailed description of such a mapping is beyond the scope of this standard.

D.3                   The UML Standard

The ArchiMate language has derived a number of concepts from UML [8]. For other concepts, straightforward correspondences can be defined.

In the Business Layer, the ArchiMate business process concept can be mapped onto UML activity diagrams, where more detailed specifications of such processes can be given (although BPMN would be the preferred language for detailed process and workflow modeling). The ArchiMate business actor and role concepts can both be mapped onto UML actors, although the latter can also be used for modeling automated actors. Business collaborations have been inspired by collaborations as defined in the UML standard [8], although the UML collaborations apply to components in the Application Layer.

In the Application Layer, the application component element corresponds to the UML component. This facilitates the direct linkage between higher-level Enterprise Architecture models described in ArchiMate notation and lower-level solution architecture and implementation models in UML in one continuous development chain. In less direct manner, the ArchiMate application function concept can be mapped onto UML activity diagrams, and an application service to a use-case diagram. Application collaborations also correspond to UML collaborations.

Many of the elements of the ArchiMate Technology Layer correspond directly to UML. The node, artifact, device, system software, and path elements have a direct counterpart in UML (where system software is called execution environment).

In addition to these elements, many relationships in the ArchiMate language have close ties to UML as well. The ArchiMate association, composition, aggregation, specialization, and realization relationships have a direct counterpart in UML.

There are also some notable differences between the two languages. The ArchiMate serving relationship (formerly used by) is different from UML dependency. Although their notations are similar, their directions are different. UML dependency is often used to model, for example, function calls in software programs, but in ArchiMate notation, the direction of the serving relationship denotes the direction of service delivery, independent of whether this service is called by the user or offered pro-actively by the provider. At the architectural level at which the ArchiMate language is aimed, the run-time operational details of such call graphs is less important than the more stable and generic notion of service provision.

This also points to another important difference: UML does not have a separate service concept, since in its object-oriented paradigm the behavior expressed by a service is encapsulated within the interface offering that behavior (i.e., its operations). The ArchiMate language differentiates between interfaces and the services they provide to allow, for example, specifying that the same service is offered through multiple interfaces. Hence, an ArchiMate application interface does not equate directly with a UML interface.

Finally, UML has a predefined, fixed set of diagram types, whereas the ArchiMate viewpoint mechanism allows for the construction of custom, stakeholder-oriented views on an architecture.

See [16] for a more detailed explanation about how the UML language and the ArchiMate standard can be used together.

D.4                   The BMM Standard

The ArchiMate strategy and motivation elements have been inspired partly by the Business Motivation Model (BMM) [15]. BMM distinguishes between means, ends, and influencers and assessments. It provides fairly detailed concepts for these categories. The ArchiMate course of action element corresponds directly with the course of action element in BMM, whereas its directive concepts can be modeled with the ArchiMate principle, requirement, and constraint elements.

BMM concepts for modeling ends are typically mapped onto the ArchiMate goal element. Its influencers correspond to the ArchiMate element of driver, whereas its assessments map directly onto the ArchiMate assessment element.

Although a mapping between many of the ArchiMate motivation and implementation elements and BMM concepts is possible, BMM provides a more detailed, fine-grained description of business motivation. In that sense, it is comparable to the other languages described in this appendix. Where the ArchiMate language aims to cover a broad scope and interlink various domains, these more specialized languages zoom in on the details of their specific domains.

 



return to top of page

Downloads

Downloads of the ArchiMate documentation, are available under license from the ArchiMate information web site. The license is free to any organization wishing to use ArchiMate entirely for internal purposes. A book is also available (in hardcopy and pdf) from The Open Group Bookstore as document C162.


Copyright © 2012-2016 The Open Group, All Rights Reserved
ArchiMate is a registered trademark of The Open Group.