NAME

pread, read - read from a file

SYNOPSIS

#include <unistd.h>



[XSI] ssize_t pread(int fildes, void *buf, size_t nbyte, off_t offset);

ssize_t read(int fildes, void *buf, size_t nbyte);

DESCRIPTION

The read() function shall attempt to read nbyte bytes from the file associated with the open file descriptor, fildes, into the buffer pointed to by buf. The behavior of multiple concurrent reads on the same pipe, FIFO, or terminal device is unspecified.

Before any action described below is taken, and if nbyte is zero, the read() function may detect and return errors as described below. In the absence of errors, or if error detection is not performed, the read() function shall return zero and have no other results.

On files that support seeking (for example, a regular file), the read() shall start at a position in the file given by the file offset associated with fildes. The file offset shall be incremented by the number of bytes actually read.

Files that do not support seeking-for example, terminals-always read from the current position. The value of a file offset associated with such a file is undefined.

No data transfer shall occur past the current end-of-file. If the starting position is at or after the end-of-file, 0 shall be returned. If the file refers to a device special file, the result of subsequent read() requests is implementation-defined.

If the value of nbyte is greater than {SSIZE_MAX}, the result is implementation-defined.

When attempting to read from an empty pipe or FIFO:

• If no process has the pipe open for writing, read() shall return 0 to indicate end-of-file.

• If some process has the pipe open for writing and O_NONBLOCK is set, read() shall return -1 and set errno to [EAGAIN].

• If some process has the pipe open for writing and O_NONBLOCK is clear, read() shall block the calling thread until some data is written or the pipe is closed by all processes that had the pipe open for writing.

When attempting to read a file (other than a pipe or FIFO) that supports non-blocking reads and has no data currently available:

• If O_NONBLOCK is set, read() shall return -1 and set errno to [EAGAIN].

• If O_NONBLOCK is clear, read() shall block the calling thread until some data becomes available.

• The use of the O_NONBLOCK flag has no effect if there is some data available.

The read() function reads data previously written to a file. If any portion of a regular file prior to the end-of-file has not been written, read() shall return bytes with value 0. For example, lseek() allows the file offset to be set beyond the end of existing data in the file. If data is later written at this point, subsequent reads in the gap between the previous end of data and the newly written data shall return bytes with value 0 until data is written into the gap.

Upon successful completion, where nbyte is greater than 0, read() shall mark for update the st_atime field of the file, and shall return the number of bytes read. This number shall never be greater than nbyte. The value returned may be less than nbyte if the number of bytes left in the file is less than nbyte, if the read() request was interrupted by a signal, or if the file is a pipe or FIFO or special file and has fewer than nbyte bytes immediately available for reading. For example, a read() from a file associated with a terminal may return one typed line of data.

If a read() is interrupted by a signal before it reads any data, it shall return -1 with errno set to [EINTR].

If a read() is interrupted by a signal after it has successfully read some data, it shall return the number of bytes read.

For regular files, no data transfer shall occur past the offset maximum established in the open file description associated with fildes.

If fildes refers to a socket, read() shall be equivalent to recv() with no flags set.

^[SIO] If the O_DSYNC and O_RSYNC bits have been set, read I/O operations on the file descriptor shall complete as defined by synchronized I/O data integrity completion. If the O_SYNC and O_RSYNC bits have been set, read I/O operations on the file descriptor shall complete as defined by synchronized I/O file integrity completion.

^[SHM] If fildes refers to a shared memory object, the result of the read() function is unspecified.

^[TYM] If fildes refers to a typed memory object, the result of the read() function is unspecified.

^[XSR] A read() from a STREAMS file can read data in three different modes: byte-stream mode, message-nondiscard mode, and message-discard mode. The default shall be byte-stream mode. This can be changed using the I_SRDOPT ioctl() request, and can be tested with I_GRDOPT ioctl(). In byte-stream mode, read() shall retrieve data from the STREAM until as many bytes as were requested are transferred, or until there is no more data to be retrieved. Byte-stream mode ignores message boundaries.

In STREAMS message-nondiscard mode, read() shall retrieve data until as many bytes as were requested are transferred, or until a message boundary is reached. If read() does not retrieve all the data in a message, the remaining data shall be left on the STREAM, and can be retrieved by the next read() call. Message-discard mode also retrieves data until as many bytes as were requested are transferred, or a message boundary is reached. However, unread data remaining in a message after the read() returns shall be discarded, and shall not be available for a subsequent read(), getmsg(), or getpmsg() call.

How read() handles zero-byte STREAMS messages is determined by the current read mode setting. In byte-stream mode, read() shall accept data until it has read nbyte bytes, or until there is no more data to read, or until a zero-byte message block is encountered. The read() function shall then return the number of bytes read, and place the zero-byte message back on the STREAM to be retrieved by the next read(), getmsg(), or getpmsg(). In message-nondiscard mode or message-discard mode, a zero-byte message shall return 0 and the message shall be removed from the STREAM. When a zero-byte message is read as the first message on a STREAM, the message shall be removed from the STREAM and 0 shall be returned, regardless of the read mode.

A read() from a STREAMS file shall return the data in the message at the front of the STREAM head read queue, regardless of the priority band of the message.

By default, STREAMs are in control-normal mode, in which a read() from a STREAMS file can only process messages that contain a data part but do not contain a control part. The read() shall fail if a message containing a control part is encountered at the STREAM head. This default action can be changed by placing the STREAM in either control-data mode or control-discard mode with the I_SRDOPT ioctl() command. In control-data mode, read() shall convert any control part to data and pass it to the application before passing any data part originally present in the same message. In control-discard mode, read() shall discard message control parts but return to the process any data part in the message.

In addition, read() shall fail if the STREAM head had processed an asynchronous error before the call. In this case, the value of errno shall not reflect the result of read(), but reflect the prior error. If a hangup occurs on the STREAM being read, read() shall continue to operate normally until the STREAM head read queue is empty. Thereafter, it shall return 0.

^[XSI] The pread() function shall be equivalent to read(), except that it shall read from a given position in the file without changing the file pointer. The first three arguments to pread() are the same as read() with the addition of a fourth argument offset for the desired position inside the file. An attempt to perform a pread() on a file that is incapable of seeking shall result in an error.

RETURN VALUE

Upon successful completion, read() ^[XSI]  and pread() shall return a non-negative integer indicating the number of bytes actually read. Otherwise, the functions shall return -1 and set errno to indicate the error.

ERRORS

The read() and ^[XSI] pread() functions shall fail if:

[EAGAIN]

The O_NONBLOCK flag is set for the file descriptor and the thread would be delayed.

[EBADF]

The fildes argument is not a valid file descriptor open for reading.

[EBADMSG]

^[XSR] The file is a STREAM file that is set to control-normal mode and the message waiting to be read includes a control part.

[EINTR]

The read operation was terminated due to the receipt of a signal, and no data was transferred.

[EINVAL]

^[XSR] The STREAM or multiplexer referenced by fildes is linked (directly or indirectly) downstream from a multiplexer.

[EIO]

The process is a member of a background process attempting to read from its controlling terminal, the process is ignoring or blocking the SIGTTIN signal, or the process group is orphaned. This error may also be generated for implementation-defined reasons.

[EISDIR]

^[XSI] The fildes argument refers to a directory and the implementation does not allow the directory to be read using read() or pread(). The readdir() function should be used instead.

[EOVERFLOW]

The file is a regular file, nbyte is greater than 0, the starting position is before the end-of-file, and the starting position is greater than or equal to the offset maximum established in the open file description associated with fildes.

The read() function shall fail if:

[EAGAIN] or [EWOULDBLOCK]

The file descriptor is for a socket, is marked O_NONBLOCK, and no data is waiting to be received.

[ECONNRESET]

A read was attempted on a socket and the connection was forcibly closed by its peer.

[ENOTCONN]

A read was attempted on a socket that is not connected.

[ETIMEDOUT]

A read was attempted on a socket and a transmission timeout occurred.

The read() and ^[XSI] pread() functions may fail if:

[EIO]

A physical I/O error has occurred.

[ENOBUFS]

Insufficient resources were available in the system to perform the operation.

[ENOMEM]

Insufficient memory was available to fulfill the request.

[ENXIO]

A request was made of a nonexistent device, or the request was outside the capabilities of the device.

The pread() function shall fail, and the file pointer shall remain unchanged, if:

[EINVAL]

^[XSI] The offset argument is invalid. The value is negative.

[EOVERFLOW]

^[XSI] The file is a regular file and an attempt was made to read at or beyond the offset maximum associated with the file.

[ENXIO]

^[XSI] A request was outside the capabilities of the device.

[ESPIPE]

^[XSI] fildes is associated with a pipe or FIFO.

EXAMPLES

Reading Data into a Buffer

The following example reads data from the file associated with the file descriptor fd into the buffer pointed to by buf.

#include <sys/types.h>
#include <unistd.h>
...
char buf[20];
size_t nbytes;
ssize_t bytes_read;
int fd;
...
nbytes = sizeof(buf);
bytes_read = read(fd, buf, nbytes);
...

APPLICATION USAGE

None.

RATIONALE

This volume of IEEE Std 1003.1-2001 does not specify the value of the file offset after an error is returned; there are too many cases. For programming errors, such as [EBADF], the concept is meaningless since no file is involved. For errors that are detected immediately, such as [EAGAIN], clearly the pointer should not change. After an interrupt or hardware error, however, an updated value would be very useful and is the behavior of many implementations.

Note that a read() of zero bytes does not modify st_atime. A read() that requests more than zero bytes, but returns zero, shall modify st_atime.

Implementations are allowed, but not required, to perform error checking for read() requests of zero bytes.

Input and Output

The use of I/O with large byte counts has always presented problems. Ideas such as lread() and lwrite() (using and returning longs) were considered at one time. The current solution is to use abstract types on the ISO C standard function to read() and write(). The abstract types can be declared so that existing functions work, but can also be declared so that larger types can be represented in future implementations. It is presumed that whatever constraints limit the maximum range of size_t also limit portable I/O requests to the same range. This volume of IEEE Std 1003.1-2001 also limits the range further by requiring that the byte count be limited so that a signed return value remains meaningful. Since the return type is also a (signed) abstract type, the byte count can be defined by the implementation to be larger than an int can hold.

The standard developers considered adding atomicity requirements to a pipe or FIFO, but recognized that due to the nature of pipes and FIFOs there could be no guarantee of atomicity of reads of {PIPE_BUF} or any other size that would be an aid to applications portability.

This volume of IEEE Std 1003.1-2001 requires that no action be taken for read() or write() when nbyte is zero. This is not intended to take precedence over detection of errors (such as invalid buffer pointers or file descriptors). This is consistent with the rest of this volume of IEEE Std 1003.1-2001, but the phrasing here could be misread to require detection of the zero case before any other errors. A value of zero is to be considered a correct value, for which the semantics are a no-op.

I/O is intended to be atomic to ordinary files and pipes and FIFOs. Atomic means that all the bytes from a single operation that started out together end up together, without interleaving from other I/O operations. It is a known attribute of terminals that this is not honored, and terminals are explicitly (and implicitly permanently) excepted, making the behavior unspecified. The behavior for other device types is also left unspecified, but the wording is intended to imply that future standards might choose to specify atomicity (or not).

There were recommendations to add format parameters to read() and write() in order to handle networked transfers among heterogeneous file system and base hardware types. Such a facility may be required for support by the OSI presentation of layer services. However, it was determined that this should correspond with similar C-language facilities, and that is beyond the scope of this volume of IEEE Std 1003.1-2001. The concept was suggested to the developers of the ISO C standard for their consideration as a possible area for future work.

In 4.3 BSD, a read() or write() that is interrupted by a signal before transferring any data does not by default return an [EINTR] error, but is restarted. In 4.2 BSD, 4.3 BSD, and the Eighth Edition, there is an additional function, select(), whose purpose is to pause until specified activity (data to read, space to write, and so on) is detected on specified file descriptors. It is common in applications written for those systems for select() to be used before read() in situations (such as keyboard input) where interruption of I/O due to a signal is desired.

The issue of which files or file types are interruptible is considered an implementation design issue. This is often affected primarily by hardware and reliability issues.

There are no references to actions taken following an "unrecoverable error". It is considered beyond the scope of this volume of IEEE Std 1003.1-2001 to describe what happens in the case of hardware errors.

Previous versions of IEEE Std 1003.1-2001 allowed two very different behaviors with regard to the handling of interrupts. In order to minimize the resulting confusion, it was decided that IEEE Std 1003.1-2001 should support only one of these behaviors. Historical practice on AT&T-derived systems was to have read() and write() return -1 and set errno to [EINTR] when interrupted after some, but not all, of the data requested had been transferred. However, the U.S. Department of Commerce FIPS 151-1 and FIPS 151-2 require the historical BSD behavior, in which read() and write() return the number of bytes actually transferred before the interrupt. If -1 is returned when any data is transferred, it is difficult to recover from the error on a seekable device and impossible on a non-seekable device. Most new implementations support this behavior. The behavior required by IEEE Std 1003.1-2001 is to return the number of bytes transferred.

IEEE Std 1003.1-2001 does not specify when an implementation that buffers read()s actually moves the data into the user-supplied buffer, so an implementation may choose to do this at the latest possible moment. Therefore, an interrupt arriving earlier may not cause read() to return a partial byte count, but rather to return -1 and set errno to [EINTR].

Consideration was also given to combining the two previous options, and setting errno to [EINTR] while returning a short count. However, not only is there no existing practice that implements this, it is also contradictory to the idea that when errno is set, the function responsible shall return -1.

FUTURE DIRECTIONS

None.

SEE ALSO

fcntl(), ioctl(), lseek(), open(), pipe(), readv(), the Base Definitions volume of IEEE Std 1003.1-2001, Chapter 11, General Terminal Interface, <stropts.h>, <sys/uio.h>, <unistd.h>

CHANGE HISTORY

First released in Issue 1. Derived from Issue 1 of the SVID.

Issue 5

The DESCRIPTION is updated for alignment with the POSIX Realtime Extension and the POSIX Threads Extension.

Large File Summit extensions are added.

The pread() function is added.

Issue 6

The DESCRIPTION and ERRORS sections are updated so that references to STREAMS are marked as part of the XSI STREAMS Option Group.

The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:

• The DESCRIPTION now states that if read() is interrupted by a signal after it has successfully read some data, it returns the number of bytes read. In Issue 3, it was optional whether read() returned the number of bytes read, or whether it returned -1 with errno set to [EINTR]. This is a FIPS requirement.

• In the DESCRIPTION, text is added to indicate that for regular files, no data transfer occurs past the offset maximum established in the open file description associated with fildes. This change is to support large files.

• The [EOVERFLOW] mandatory error condition is added.

• The [ENXIO] optional error condition is added.

Text referring to sockets is added to the DESCRIPTION.

The following changes were made to align with the IEEE P1003.1a draft standard:

• The effect of reading zero bytes is clarified.

The DESCRIPTION is updated for alignment with IEEE Std 1003.1j-2000 by specifying that read() results are unspecified for typed memory objects.

New RATIONALE is added to explain the atomicity requirements for input and output operations.

The following error conditions are added for operations on sockets: [EAGAIN], [ECONNRESET], [ENOTCONN], and [ETIMEDOUT].

The [EIO] error is made optional.

The following error conditions are added for operations on sockets: [ENOBUFS] and [ENOMEM].

The readv() function is split out into a separate reference page.

IEEE Std 1003.1-2001/Cor 2-2004, item XSH/TC2/D6/108 is applied, updating the [EAGAIN] error in the ERRORS section from "the process would be delayed" to "the thread would be delayed".

IEEE Std 1003.1-2001/Cor 2-2004, item XSH/TC2/D6/109 is applied, making an editorial correction in the RATIONALE section.