NAME

chmod, fchmodat - change mode of a file

SYNOPSIS

#include <sys/stat.h>

int chmod(const char *path, mode_t mode);

[OH] #include <fcntl.h>

int fchmodat(int fd, const char *path, mode_t mode, int flag);


DESCRIPTION

The chmod() function shall change S_ISUID, S_ISGID, ^[XSI]  S_ISVTX, and the file permission bits of the file named by the pathname pointed to by the path argument to the corresponding bits in the mode argument. The application shall ensure that the effective user ID of the process matches the owner of the file or the process has appropriate privileges in order to do this.

S_ISUID, S_ISGID, ^[XSI]  S_ISVTX, and the file permission bits are described in <sys/stat.h>.

If the calling process does not have appropriate privileges, and if the group ID of the file does not match the effective group ID or one of the supplementary group IDs and if the file is a regular file, bit S_ISGID (set-group-ID on execution) in the file's mode shall be cleared upon successful return from chmod().

Additional implementation-defined restrictions may cause the S_ISUID and S_ISGID bits in mode to be ignored.

Upon successful completion, chmod() shall mark for update the last file status change timestamp of the file.

The fchmodat() function shall be equivalent to the chmod() function except in the case where path specifies a relative path. In this case the file to be changed is determined relative to the directory associated with the file descriptor fd instead of the current working directory. If the access mode of the open file description associated with the file descriptor is not O_SEARCH, the function shall check whether directory searches are permitted using the current permissions of the directory underlying the file descriptor. If the access mode is O_SEARCH, the function shall not perform the check.

Values for flag are constructed by a bitwise-inclusive OR of flags from the following list, defined in <fcntl.h>:

AT_SYMLINK_NOFOLLOW

If path names a symbolic link, then the mode of the symbolic link is changed.

If fchmodat() is passed the special value AT_FDCWD in the fd parameter, the current working directory shall be used. If also flag is zero, the behavior shall be identical to a call to chmod().

RETURN VALUE

Upon successful completion, these functions shall return 0. Otherwise, these functions shall return -1 and set errno to indicate the error. If -1 is returned, no change to the file mode occurs.

ERRORS

These functions shall fail if:

[EACCES]

Search permission is denied on a component of the path prefix.

[ELOOP]

A loop exists in symbolic links encountered during resolution of the path argument.

[ENAMETOOLONG]

The length of a component of a pathname is longer than {NAME_MAX}.

[ENOENT]

A component of path does not name an existing file or path is an empty string.

[ENOTDIR]

A component of the path prefix names an existing file that is neither a directory nor a symbolic link to a directory, or the path argument contains at least one non- <slash> character and ends with one or more trailing <slash> characters and the last pathname component names an existing file that is neither a directory nor a symbolic link to a directory.

[EPERM]

The effective user ID does not match the owner of the file and the process does not have appropriate privileges.

[EROFS]

The named file resides on a read-only file system.

The fchmodat() function shall fail if:

[EACCES]

The access mode of the open file description associated with fd is not O_SEARCH and the permissions of the directory underlying fd do not permit directory searches.

[EBADF]

The path argument does not specify an absolute path and the fd argument is neither AT_FDCWD nor a valid file descriptor open for reading or searching.

[ENOTDIR]

The path argument is not an absolute path and fd is a file descriptor associated with a non-directory file.

These functions may fail if:

[EINTR]

A signal was caught during execution of the function.

[EINVAL]

The value of the mode argument is invalid.

[ELOOP]

More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the path argument.

[ENAMETOOLONG]

The length of a pathname exceeds {PATH_MAX}, or pathname resolution of a symbolic link produced an intermediate result with a length that exceeds {PATH_MAX}.

The fchmodat() function may fail if:

[EINVAL]

The value of the flag argument is invalid.

[EOPNOTSUPP]

The AT_SYMLINK_NOFOLLOW bit is set in the flag argument, path names a symbolic link, and the system does not support changing the mode of a symbolic link.

EXAMPLES

Setting Read Permissions for User, Group, and Others

The following example sets read permissions for the owner, group, and others.

#include <sys/stat.h>


const char *path;
...
chmod(path, S_IRUSR|S_IRGRP|S_IROTH);

Setting Read, Write, and Execute Permissions for the Owner Only

The following example sets read, write, and execute permissions for the owner, and no permissions for group and others.

#include <sys/stat.h>


const char *path;
...
chmod(path, S_IRWXU);

Setting Different Permissions for Owner, Group, and Other

The following example sets owner permissions for CHANGEFILE to read, write, and execute, group permissions to read and execute, and other permissions to read.

#include <sys/stat.h>


#define CHANGEFILE "/etc/myfile"
...
chmod(CHANGEFILE, S_IRWXU|S_IRGRP|S_IXGRP|S_IROTH);

Setting and Checking File Permissions

The following example sets the file permission bits for a file named /home/cnd/mod1, then calls the stat() function to verify the permissions.

#include <sys/types.h>
#include <sys/stat.h>


int status;
struct stat buffer
...
chmod("/home/cnd/mod1", S_IRWXU|S_IRWXG|S_IROTH|S_IWOTH);
status = stat("/home/cnd/mod1", &buffer);

APPLICATION USAGE

In order to ensure that the S_ISUID and S_ISGID bits are set, an application requiring this should use stat() after a successful chmod() to verify this.

Any file descriptors currently open by any process on the file could possibly become invalid if the mode of the file is changed to a value which would deny access to that process. One situation where this could occur is on a stateless file system. This behavior will not occur in a conforming environment.

RATIONALE

This volume of POSIX.1-2008 specifies that the S_ISGID bit is cleared by chmod() on a regular file under certain conditions. This is specified on the assumption that regular files may be executed, and the system should prevent users from making executable setgid() files perform with privileges that the caller does not have. On implementations that support execution of other file types, the S_ISGID bit should be cleared for those file types under the same circumstances.

Implementations that use the S_ISUID bit to indicate some other function (for example, mandatory record locking) on non-executable files need not clear this bit on writing. They should clear the bit for executable files and any other cases where the bit grants special powers to processes that change the file contents. Similar comments apply to the S_ISGID bit.

The purpose of the fchmodat() function is to enable changing the mode of files in directories other than the current working directory without exposure to race conditions. Any part of the path of a file could be changed in parallel to a call to chmod(), resulting in unspecified behavior. By opening a file descriptor for the target directory and using the fchmodat() function it can be guaranteed that the changed file is located relative to the desired directory. Some implementations might allow changing the mode of symbolic links. This is not supported by the interfaces in the POSIX specification. Systems with such support provide an interface named lchmod(). To support such implementations fchmodat() has a flag parameter.

FUTURE DIRECTIONS

None.

SEE ALSO

access, chown, exec, fstatat, fstatvfs, mkdir, mkfifo, mknod, open

XBD <fcntl.h>, <sys/stat.h>, <sys/types.h>

CHANGE HISTORY

First released in Issue 1. Derived from Issue 1 of the SVID.

Issue 6

The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:

• The requirement to include <sys/types.h> has been removed. Although <sys/types.h> was required for conforming implementations of previous POSIX specifications, it was not required for UNIX applications.

• The [EINVAL] and [EINTR] optional error conditions are added.

• A second [ENAMETOOLONG] is added as an optional error condition.

The following changes were made to align with the IEEE P1003.1a draft standard:

• The [ELOOP] optional error condition is added.

The normative text is updated to avoid use of the term "must" for application requirements.

Issue 7

Austin Group Interpretation 1003.1-2001 #143 is applied.

The fchmodat() function is added from The Open Group Technical Standard, 2006, Extended API Set Part 2.

Changes are made related to support for finegrained timestamps.

Changes are made to allow a directory to be opened for searching.

The [ENOTDIR] error condition is clarified to cover the condition where the last component of a pathname exists but is not a directory or a symbolic link to a directory.

POSIX.1-2008, Technical Corrigendum 1, XSH/TC1-2008/0048 [300], XSH/TC1-2008/0049 [461], XSH/TC1-2008/0050 [324], XSH/TC1-2008/0051 [278], and XSH/TC1-2008/0052 [278] are applied.

POSIX.1-2008, Technical Corrigendum 2, XSH/TC2-2008/0057 [873], XSH/TC2-2008/0058 [591], XSH/TC2-2008/0059 [817], XSH/TC2-2008/0060 [817], and XSH/TC2-2008/0061 [893] are applied.