The Open Group Base Specifications Issue 7, 2018 edition
IEEE Std 1003.1-2017 (Revision of IEEE Std 1003.1-2008)
Copyright © 2001-2018 IEEE and The Open Group
A newer edition of this document exists here

NAME

chown, fchownat - change owner and group of a file

SYNOPSIS

#include <unistd.h>

int chown(const char *
path, uid_t owner, gid_t group);

[OH] #include <fcntl.h>

int fchownat(int
fd, const char *path, uid_t owner, gid_t group,
       int
flag);

DESCRIPTION

The chown() function shall change the user and group ownership of a file.

The path argument points to a pathname naming a file. The user ID and group ID of the named file shall be set to the numeric values contained in owner and group, respectively.

Only processes with an effective user ID equal to the user ID of the file or with appropriate privileges may change the ownership of a file. If _POSIX_CHOWN_RESTRICTED is in effect for path:

If the specified file is a regular file, one or more of the S_IXUSR, S_IXGRP, or S_IXOTH bits of the file mode are set, and the process does not have appropriate privileges, the set-user-ID (S_ISUID) and set-group-ID (S_ISGID) bits of the file mode shall be cleared upon successful return from chown(). If the specified file is a regular file, one or more of the S_IXUSR, S_IXGRP, or S_IXOTH bits of the file mode are set, and the process has appropriate privileges, it is implementation-defined whether the set-user-ID and set-group-ID bits are altered. If the chown() function is successfully invoked on a file that is not a regular file and one or more of the S_IXUSR, S_IXGRP, or S_IXOTH bits of the file mode are set, the set-user-ID and set-group-ID bits may be cleared.

If owner or group is specified as (uid_t)-1 or (gid_t)-1, respectively, the corresponding ID of the file shall not be changed.

Upon successful completion, chown() shall mark for update the last file status change timestamp of the file, except that if owner is (uid_t)-1 and group is (gid_t)-1, the file status change timestamp need not be marked for update.

The fchownat() function shall be equivalent to the chown() and lchown() functions except in the case where path specifies a relative path. In this case the file to be changed is determined relative to the directory associated with the file descriptor fd instead of the current working directory. If the access mode of the open file description associated with the file descriptor is not O_SEARCH, the function shall check whether directory searches are permitted using the current permissions of the directory underlying the file descriptor. If the access mode is O_SEARCH, the function shall not perform the check.

Values for flag are constructed by a bitwise-inclusive OR of flags from the following list, defined in <fcntl.h>:

AT_SYMLINK_NOFOLLOW
If path names a symbolic link, ownership of the symbolic link is changed.

If fchownat() is passed the special value AT_FDCWD in the fd parameter, the current working directory shall be used and the behavior shall be identical to a call to chown() or lchown() respectively, depending on whether or not the AT_SYMLINK_NOFOLLOW bit is set in the flag argument.

RETURN VALUE

Upon successful completion, these functions shall return 0. Otherwise, these functions shall return -1 and set errno to indicate the error. If -1 is returned, no changes are made in the user ID and group ID of the file.

ERRORS

These functions shall fail if:

[EACCES]
Search permission is denied on a component of the path prefix.
[ELOOP]
A loop exists in symbolic links encountered during resolution of the path argument.
[ENAMETOOLONG]
The length of a component of a pathname is longer than {NAME_MAX}.
[ENOENT]
A component of path does not name an existing file or path is an empty string.
[ENOTDIR]
A component of the path prefix names an existing file that is neither a directory nor a symbolic link to a directory, or the path argument contains at least one non- <slash> character and ends with one or more trailing <slash> characters and the last pathname component names an existing file that is neither a directory nor a symbolic link to a directory.
[EPERM]
The effective user ID does not match the owner of the file, or the calling process does not have appropriate privileges and _POSIX_CHOWN_RESTRICTED indicates that such privilege is required.
[EROFS]
The named file resides on a read-only file system.

The fchownat() function shall fail if:

[EACCES]
The access mode of the open file description associated with fd is not O_SEARCH and the permissions of the directory underlying fd do not permit directory searches.
[EBADF]
The path argument does not specify an absolute path and the fd argument is neither AT_FDCWD nor a valid file descriptor open for reading or searching.
[ENOTDIR]
The path argument is not an absolute path and fd is a file descriptor associated with a non-directory file.

These functions may fail if:

[EIO]
An I/O error occurred while reading or writing to the file system.
[EINTR]
The chown() function was interrupted by a signal which was caught.
[EINVAL]
The owner or group ID supplied is not a value supported by the implementation.
[ELOOP]
More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the path argument.
[ENAMETOOLONG]
The length of a pathname exceeds {PATH_MAX}, or pathname resolution of a symbolic link produced an intermediate result with a length that exceeds {PATH_MAX}.

The fchownat() function may fail if:

[EINVAL]
The value of the flag argument is not valid.

The following sections are informative.

EXAMPLES

None.

APPLICATION USAGE

Although chown() can be used on some implementations by the file owner to change the owner and group to any desired values, the only portable use of this function is to change the group of a file to the effective GID of the calling process or to a member of its group set.

RATIONALE

System III and System V allow a user to give away files; that is, the owner of a file may change its user ID to anything. This is a serious problem for implementations that are intended to meet government security regulations. Version 7 and 4.3 BSD permit only the superuser to change the user ID of a file. Some government agencies (usually not ones concerned directly with security) find this limitation too confining. This volume of POSIX.1-2017 uses may to permit secure implementations while not disallowing System V.

System III and System V allow the owner of a file to change the group ID to anything. Version 7 permits only the superuser to change the group ID of a file. 4.3 BSD permits the owner to change the group ID of a file to its effective group ID or to any of the groups in the list of supplementary group IDs, but to no others.

The POSIX.1-1990 standard requires that the chown() function invoked by a non-appropriate privileged process clear the S_ISGID and the S_ISUID bits for regular files, and permits them to be cleared for other types of files. This is so that changes in accessibility do not accidentally cause files to become security holes. Unfortunately, requiring these bits to be cleared on non-executable data files also clears the mandatory file locking bit (shared with S_ISGID), which is an extension on many implementations (it first appeared in System V). These bits should only be required to be cleared on regular files that have one or more of their execute bits set.

The purpose of the fchownat() function is to enable changing ownership of files in directories other than the current working directory without exposure to race conditions. Any part of the path of a file could be changed in parallel to a call to chown() or lchown(), resulting in unspecified behavior. By opening a file descriptor for the target directory and using the fchownat() function it can be guaranteed that the changed file is located relative to the desired directory.

FUTURE DIRECTIONS

None.

SEE ALSO

chmod, fpathconf, lchown

XBD <fcntl.h>, <sys/types.h>, <unistd.h>

CHANGE HISTORY

First released in Issue 1. Derived from Issue 1 of the SVID.

Issue 6

The following changes are made for alignment with the ISO POSIX-1:1996 standard:

The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:

The following changes were made to align with the IEEE P1003.1a draft standard:

Issue 7

Austin Group Interpretation 1003.1-2001 #143 is applied.

The fchownat() function is added from The Open Group Technical Standard, 2006, Extended API Set Part 2.

Changes are made related to support for finegrained timestamps.

Changes are made to allow a directory to be opened for searching.

The [ENOTDIR] error condition is clarified to cover the condition where the last component of a pathname exists but is not a directory or a symbolic link to a directory.

POSIX.1-2008, Technical Corrigendum 1, XSH/TC1-2008/0053 [461], XSH/TC1-2008/0054 [324], XSH/TC1-2008/0055 [278], and XSH/TC1-2008/0056 [278] are applied.

POSIX.1-2008, Technical Corrigendum 2, XSH/TC2-2008/0062 [873], XSH/TC2-2008/0063 [591], XSH/TC2-2008/0064 [485], XSH/TC2-2008/0065 [817], and XSH/TC2-2008/0066 [817] are applied.

End of informative text.

 

return to top of page

UNIX ® is a registered Trademark of The Open Group.
POSIX ™ is a Trademark of The IEEE.
Copyright © 2001-2018 IEEE and The Open Group, All Rights Reserved
[ Main Index | XBD | XSH | XCU | XRAT ]