NAME

open, openat — open file

SYNOPSIS

[OH] #include <sys/stat.h>
#include <fcntl.h>

int open(const char *path, int oflag, ...);
int openat(int fd, const char *path, int oflag, ...);


DESCRIPTION

The open() function shall establish the connection between a file and a file descriptor. It shall create an open file description that refers to a file and a file descriptor that refers to that open file description. The file descriptor is used by other I/O functions to refer to that file. The path argument points to a pathname naming the file.

The open() function shall return a file descriptor for the named file, allocated as described in 2.6 File Descriptor Allocation . The open file description is new, and therefore the file descriptor shall not share it with any other process in the system. The FD_CLOEXEC file descriptor flag associated with the new file descriptor shall be cleared unless the O_CLOEXEC flag is set in oflag. The FD_CLOFORK file descriptor flag associated with the new file descriptor shall be cleared unless the O_CLOFORK flag is set in oflag.

The file offset used to mark the current position within the file shall be set to the beginning of the file.

The file status flags and file access modes of the open file description shall be set according to the value of oflag.

Values for oflag are constructed by a bitwise-inclusive OR of flags from the following list, defined in <fcntl.h>. Applications shall specify exactly one of the first five values (file access modes) below in the value of oflag:

O_EXEC

Open for execute only (non-directory files). If path names a directory and O_EXEC is not the same value as O_SEARCH, open() shall fail.

O_RDONLY

Open for reading only.

O_RDWR

Open for reading and writing. If path names a FIFO, and the implementation does not support opening a FIFO for simultaneous read and write, then open() shall fail.

O_SEARCH

Open directory for search only. If path names a non-directory file and O_SEARCH is not the same value as O_EXEC, open() shall fail.

O_WRONLY

Open for writing only.

Any combination of the following may be used:

O_APPEND

If set, the file offset shall be set to the end of the file prior to each write.

O_CLOEXEC

If set, the FD_CLOEXEC flag for the new file descriptor shall be set.

O_CLOFORK

If set, the FD_CLOFORK flag for the new file descriptor shall be set.

O_CREAT

If the file exists, this flag has no effect except as noted under O_EXCL below. Otherwise, if O_DIRECTORY is not set the file shall be created as a regular file; the user ID of the file shall be set to the effective user ID of the process; the group ID of the file shall be set to the group ID of the file's parent directory or to the effective group ID of the process; and the access permission bits (see <sys/stat.h>) of the file mode shall be set to the value of the argument following the oflag argument taken as type mode_t modified as follows: a bitwise AND is performed on the file-mode bits and the corresponding bits in the complement of the process' file mode creation mask. Thus, all bits in the file mode whose corresponding bit in the file mode creation mask is set are cleared. When bits other than the file permission bits are set, the effect is unspecified. The argument following the oflag argument does not affect whether the file is open for reading, writing, or for both. Implementations shall provide a way to initialize the file's group ID to the group ID of the parent directory. Implementations may, but need not, provide an implementation-defined way to initialize the file's group ID to the effective group ID of the calling process.

O_DIRECTORY

If path resolves to a non-directory file, fail and set errno to [ENOTDIR].

O_DSYNC

^[SIO] Write I/O operations on the file descriptor shall complete as defined by synchronized I/O data integrity completion.

O_EXCL

If O_CREAT and O_EXCL are set, open() shall fail if the file exists. The check for the existence of the file and the creation of the file if it does not exist shall be atomic with respect to other threads executing open() naming the same filename in the same directory with O_EXCL and O_CREAT set. If O_EXCL and O_CREAT are set, and path names a symbolic link, open() shall fail and set errno to [EEXIST], regardless of the contents of the symbolic link. If O_EXCL is set and O_CREAT is not set, the result is undefined.

O_NOCTTY

If set and path identifies a terminal device, open() shall not cause the terminal device to become the controlling terminal for the process. If path does not identify a terminal device, O_NOCTTY shall be ignored.

O_NOFOLLOW

If path names a symbolic link, fail and set errno to [ELOOP].

O_NONBLOCK

When opening a FIFO with O_RDONLY or O_WRONLY set:

• If O_NONBLOCK is set, an open() for reading-only shall return without delay. An open() for writing-only shall return an error if no process currently has the file open for reading.

• If O_NONBLOCK is clear, an open() for reading-only shall block the calling thread until a thread opens the file for writing. An open() for writing-only shall block the calling thread until a thread opens the file for reading.

When opening a block special or character special file that supports non-blocking opens:

• If O_NONBLOCK is set, the open() function shall return without blocking for the device to be ready or available. Subsequent behavior of the device is device-specific.

• If O_NONBLOCK is clear, the open() function shall block the calling thread until the device is ready or available before returning.

Otherwise, the O_NONBLOCK flag shall not cause an error, but it is unspecified whether the file status flags will include the O_NONBLOCK flag.

O_RSYNC

^[SIO] Read I/O operations on the file descriptor shall complete at the same level of integrity as specified by the O_DSYNC and O_SYNC flags. If both O_DSYNC and O_RSYNC are set in oflag, all I/O operations on the file descriptor shall complete as defined by synchronized I/O data integrity completion. If both O_SYNC and O_RSYNC are set in flags, all I/O operations on the file descriptor shall complete as defined by synchronized I/O file integrity completion.

O_SYNC

^[XSI|SIO] Write I/O operations on the file descriptor shall complete as defined by synchronized I/O file integrity completion.

^[XSI] The O_SYNC flag shall be supported for regular files, even if the Synchronized Input and Output option is not supported.

O_TRUNC

If the file exists and is a regular file, and the file is successfully opened O_RDWR or O_WRONLY, its length shall be truncated to 0, and the mode and owner shall be unchanged. It shall have no effect on FIFO special files or terminal device files. Its effect on other file types is implementation-defined. The result of using O_TRUNC without either O_RDWR or O_WRONLY is undefined.

O_TTY_INIT

If path identifies a terminal device other than a pseudo-terminal, the device is not already open in any process, and either O_TTY_INIT is set in oflag or O_TTY_INIT has the value zero, open() shall set any non-standard termios structure terminal parameters to a state that provides conforming behavior (see XBD 11.2 Parameters that Can be Set ) and initialize the winsize structure associated with the terminal to appropriate default settings. It is unspecified whether O_TTY_INIT has any effect if the device is already open in any process. If path identifies the subsidiary side of a pseudo-terminal that is not already open in any process, open() shall set any non-standard termios structure terminal parameters to a state that provides conforming behavior and initialize the winsize structure associated with the terminal to appropriate default settings, regardless of whether O_TTY_INIT is set. If path does not identify a terminal device, O_TTY_INIT shall be ignored.

If O_CREAT and O_DIRECTORY are set and the requested access mode is neither O_WRONLY nor O_RDWR, the result is unspecified.

If O_CREAT is set and the file did not previously exist, upon successful completion, open() shall mark for update the last data access, last data modification, and last file status change timestamps of the file and the last data modification and last file status change timestamps of the parent directory.

If O_TRUNC is set and the file did previously exist, upon successful completion, open() shall mark for update the last data modification and last file status change timestamps of the file.

^[SIO] If both the O_SYNC and O_DSYNC flags are set, the effect is as if only the O_SYNC flag was set.

The application shall ensure that it specifies the O_TTY_INIT flag on the first open of a terminal device since system boot or since the device was closed by the process that last had it open. The application need not specify the O_TTY_INIT flag when opening pseudo-terminals. ^[XSI]  If path names the manager side of a pseudo-terminal device, then it is unspecified whether open() locks the subsidiary side so that it cannot be opened. Conforming applications shall call unlockpt() before opening the subsidiary side.

The largest value that can be represented correctly in an object of type off_t shall be established as the offset maximum in the open file description.

The openat() function shall be equivalent to the open() function except in the case where path specifies a relative path. In this case the file to be opened is determined relative to the directory associated with the file descriptor fd instead of the current working directory. If the access mode of the open file description associated with the file descriptor is not O_SEARCH, the function shall check whether directory searches are permitted using the current permissions of the directory underlying the file descriptor. If the access mode is O_SEARCH, the function shall not perform the check.

The oflag parameter and the optional fourth parameter correspond exactly to the parameters of open().

If openat() is passed the special value AT_FDCWD in the fd parameter, the current working directory shall be used and the behavior shall be identical to a call to open().

RETURN VALUE

Upon successful completion, these functions shall open the file and return a non-negative integer representing the file descriptor. Otherwise, these functions shall return -1 and set errno to indicate the error. If -1 is returned, no files shall be created or modified.

ERRORS

These functions shall fail if:

[EACCES]

Search permission is denied on a component of the path prefix, or the file exists and the permissions specified by oflag are denied, or the file does not exist and write permission is denied for the parent directory of the file to be created, or O_TRUNC is specified and write permission is denied.

[EEXIST]

O_CREAT and O_EXCL are set, and the named file exists.

[EILSEQ]

O_CREAT was specified, the file did not exist, and the last pathname component of path is not a portable filename and cannot be created in the target directory.

[EINTR]

A signal was caught during open().

[EINVAL]

The path argument names a FIFO, O_RDWR was specified, and the implementation considers this an error; ^[SIO]  or synchronized I/O flags were specified and the implementation does not support synchronized I/O for the file.

[EISDIR]

The named file is a directory and oflag includes O_WRONLY or O_RDWR, or includes O_CREAT without O_DIRECTORY, or includes O_EXEC when O_EXEC is not the same value as O_SEARCH.

[ELOOP]

A loop exists in symbolic links encountered during resolution of the path argument, or O_NOFOLLOW was specified and the path argument names a symbolic link.

[EMFILE]

All file descriptors available to the process are currently open.

[ENAMETOOLONG]

The length of a component of a pathname is longer than {NAME_MAX}.

[ENFILE]

The maximum allowable number of files is currently open in the system.

[ENOENT]

O_CREAT is not set and a component of path does not name an existing file, or O_CREAT is set and a component of the path prefix of path does not name an existing file, or path points to an empty string.

[ENOENT] or [ENOTDIR]

O_CREAT is set, and the path argument contains at least one non-<slash> character and ends with one or more trailing <slash> characters. If path without the trailing <slash> characters would name an existing file, an [ENOENT] error shall not occur.

[ENOSPC]

The directory or file system that would contain the new file cannot be expanded, the file does not exist, and O_CREAT is specified.

[ENOTDIR]

A component of the path prefix names an existing file that is neither a directory nor a symbolic link to a directory; or O_CREAT and O_EXCL are not specified, the path argument contains at least one non-<slash> character and ends with one or more trailing <slash> characters, and the last pathname component names an existing file that is neither a directory nor a symbolic link to a directory; or O_DIRECTORY was specified and the path argument names a non-directory file; or the path argument names a non-directory file and O_SEARCH was specified when O_SEARCH is not the same value as O_EXEC.

[ENXIO]

O_NONBLOCK is set, the named file is a FIFO, O_WRONLY is set, and no process has the file open for reading.

[ENXIO]

The named file is a character special or block special file, and the device associated with this special file does not exist.

[EOVERFLOW]

The named file is a regular file and the size of the file cannot be represented correctly in an object of type off_t.

[EROFS]

The named file resides on a read-only file system and either O_WRONLY, O_RDWR, O_CREAT (if the file does not exist), or O_TRUNC is set in the oflag argument.

The openat() function shall fail if:

[EACCES]

The access mode of the open file description associated with fd is not O_SEARCH and the permissions of the directory underlying fd do not permit directory searches.

[EBADF]

The path argument does not specify an absolute path and the fd argument is neither AT_FDCWD nor a valid file descriptor open for reading or searching.

[ENOTDIR]

The path argument is not an absolute path and fd is a file descriptor associated with a non-directory file.

These functions may fail if:

[EAGAIN]

^[XSI] The path argument names the subsidiary side of a pseudo-terminal device that is locked.

[EINVAL]

The value of the oflag argument is not valid.

[ELOOP]

More than {SYMLOOP_MAX} symbolic links were encountered during resolution of the path argument.

[ENAMETOOLONG]

The length of a pathname exceeds {PATH_MAX}, or pathname resolution of a symbolic link produced an intermediate result with a length that exceeds {PATH_MAX}.

[EOPNOTSUPP]

The path argument names a socket.

[ETXTBSY]

The file is a pure procedure (shared text) file that is being executed and oflag is O_WRONLY or O_RDWR.

EXAMPLES

Opening a File for Writing by the Owner

The following example opens the file /tmp/file, either by creating it (if it does not already exist), or by truncating its length to 0 (if it does exist). In the former case, if the call creates a new file, the access permission bits in the file mode of the file are set to permit reading and writing by the owner, and to permit reading only by group members and others.

If the call to open() is successful, the file is opened for writing.

#include <fcntl.h>
...
int fd;
mode_t mode = S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH;
char *pathname = "/tmp/file";
...
fd = open(pathname, O_WRONLY | O_CREAT | O_TRUNC, mode);
...

Opening a File Using an Existence Check

The following example uses the open() function to try to create the LOCKFILE file and open it for writing. Since the open() function specifies the O_EXCL flag, the call fails if the file already exists. In that case, the program assumes that someone else is updating the password file and exits.

#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>


#define LOCKFILE "/etc/ptmp"
...
int pfd; /* Integer for file descriptor returned by open() call. */
...
if ((pfd = open(LOCKFILE, O_WRONLY | O_CREAT | O_EXCL,
    S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) == -1)
{
    fprintf(stderr, "Cannot open /etc/ptmp. Try again later.\n");
    exit(1);
}
...

Opening a File for Writing

The following example opens a file for writing, creating the file if it does not already exist. If the file does exist, the system truncates the file to zero bytes.

#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>


#define LOCKFILE "/etc/ptmp"
...
int pfd;
char pathname[PATH_MAX+1];
...
if ((pfd = open(pathname, O_WRONLY | O_CREAT | O_TRUNC,
    S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH)) == -1)
{
    perror("Cannot open output file\n"); exit(1);
}
...

APPLICATION USAGE

POSIX.1-2024 does not require that terminal parameters be automatically set to any state on first open, nor that they be reset after the last close. It is possible for a non-conforming application to leave a terminal device in a state where the next process to use that device finds it in a non-conforming state, but has no way of determining this. To ensure that the device is set to a conforming initial state, applications which perform a first open of a terminal (other than a pseudo-terminal) should do so using the O_TTY_INIT flag to set the parameters associated with the terminal to a conforming state.

Except as specified in this volume of POSIX.1-2024, the flags allowed in oflag are not mutually-exclusive and any number of them may be used simultaneously. Not all combinations of flags make sense. For example, using O_SEARCH | O_CREAT will successfully open a pre-existing directory for searching, but if there is no existing file by that name, then it is unspecified whether a regular file will be created. Likewise, if a non-directory file descriptor is successfully returned, it is unspecified whether that descriptor will have execute permissions as if by O_EXEC (note that it is unspecified whether O_EXEC and O_SEARCH have the same value).

The O_CLOEXEC and O_CLOFORK flags of open() are necessary to avoid a data race in multi-threaded applications. Without O_CLOFORK, a file descriptor is leaked into a child process created by one thread in the window between another thread creating a file descriptor with open() and then using fcntl() to set the FD_CLOFORK flag. Without O_CLOEXEC, a file descriptor intentionally inherited by child processes is similarly leaked into an executed program if FD_CLOEXEC is not set atomically.

RATIONALE

Some implementations permit opening FIFOs with O_RDWR. Since FIFOs could be implemented in other ways, and since two file descriptors can be used to the same effect, an implementation is allowed to reject the use of O_RDWR on a FIFO.

See getgroups about the group of a newly created file.

The use of open() to create a regular file is preferable to the use of creat(), because the latter is redundant and included only for historical reasons.

The use of the O_TRUNC flag on FIFOs and directories (pipes cannot be open()-ed) must be permissible without unexpected side-effects (for example, creat() on a FIFO must not remove data). Since terminal special files might have type-ahead data stored in the buffer, O_TRUNC should not affect their content, particularly if a program that normally opens a regular file should open the current controlling terminal instead. Other file types, particularly implementation-defined ones, are left implementation-defined.

POSIX.1-2024 permits [EACCES] to be returned for conditions other than those explicitly listed.

The O_NOCTTY flag was added to allow applications to avoid unintentionally acquiring a controlling terminal as a side-effect of opening a terminal file. This volume of POSIX.1-2024 does not specify how a controlling terminal is acquired, but it allows an implementation to provide this on open() if the O_NOCTTY flag is not set and other conditions specified in XBD 11. General Terminal Interface are met.

In historical implementations the value of O_RDONLY is zero. Because of that, it is not possible to detect the presence of O_RDONLY and another option. Future implementations should encode O_RDONLY and O_WRONLY as bit flags so that:

O_RDONLY | O_WRONLY == O_RDWR

O_EXEC and O_SEARCH are specified as two of the five file access modes. Since O_EXEC does not apply to directories, and O_SEARCH only applies to directories, their values need not be distinct. Although this standard requires open() to fail on an attempt to use O_EXEC on a directory, or O_SEARCH on a non-directory, this only applies in implementations where the two modes have distinct values. Since O_RDONLY has historically had the value zero, implementations are not able to distinguish between O_SEARCH and O_SEARCH | O_RDONLY, and similarly for O_EXEC.

In general, the open() function follows the symbolic link if path names a symbolic link. However, the open() function, when called with O_CREAT and O_EXCL, is required to fail with [EEXIST] if path names an existing symbolic link, even if the symbolic link refers to a nonexistent file. This behavior is required so that privileged applications can create a new file in a known location without the possibility that a symbolic link might cause the file to be created in a different location.

For example, a privileged application that must create a file with a predictable name in a user-writable directory, such as the user's home directory, could be compromised if the user creates a symbolic link with that name that refers to a nonexistent file in a system directory. If the user can influence the contents of a file, the user could compromise the system by creating a new system configuration or spool file that would then be interpreted by the system. The test for a symbolic link which refers to a nonexisting file must be atomic with the creation of a new file.

In addition, the open() function refuses to open non-directories if the O_DIRECTORY flag is set. This avoids race conditions whereby a user might compromise the system by substituting a hard link to a sensitive file (e.g., a device or a FIFO) while a privileged application is running, where opening a file even for read access might have undesirable side-effects.

In addition, the open() function does not follow symbolic links if the O_NOFOLLOW flag is set. This avoids race conditions whereby a user might compromise the system by substituting a symbolic link to a sensitive file (e.g., a device) while a privileged application is running, where opening a file even for read access might have undesirable side-effects.

The POSIX.1-1990 standard required that the group ID of a newly created file be set to the group ID of its parent directory or to the effective group ID of the creating process. FIPS 151-2 required that implementations provide a way to have the group ID be set to the group ID of the containing directory, but did not prohibit implementations also supporting a way to set the group ID to the effective group ID of the creating process. Conforming applications should not assume which group ID will be used. If it matters, an application can use chown() to set the group ID after the file is created, or determine under what conditions the implementation will set the desired group ID.

The purpose of the openat() function is to enable opening files in directories other than the current working directory without exposure to race conditions. Any part of the path of a file could be changed in parallel to a call to open(), resulting in unspecified behavior. By opening a file descriptor for the target directory and using the openat() function it can be guaranteed that the opened file is located relative to the desired directory. Some implementations use the openat() function for other purposes as well. In some cases, if the oflag parameter has the O_XATTR bit set, the returned file descriptor provides access to extended attributes. This functionality is not standardized here.

Implementations are encouraged to have open() and openat() report an [EILSEQ] error if oflag includes O_CREAT, the file did not previously exist, and the last component of path contains any bytes that have the encoded value of a <newline> character.

FUTURE DIRECTIONS

A future version of this standard may add an O_NOCLOBBER flag, specified as follows, for use by shells when the noclobber option is set (see XRAT C.2.7.2 Redirecting Output ):

O_NOCLOBBER

If O_CREAT and O_NOCLOBBER are set, open() shall fail if the file exists and is either a regular file or a symbolic link that resolves to a regular file. The check for the existence and type of the file and the creation of the file if it does not exist shall be atomic with respect to other threads executing open() naming the same filename in the same directory with O_NOCLOBBER and O_CREAT set or with O_EXCL and O_CREAT set. If O_NOCLOBBER and O_CREAT are set, and the file exists and is either a non-regular file or a symbolic link that resolves to a non-regular file, the file shall be opened as if neither flag was set. If O_NOCLOBBER and O_CREAT are set, and path names a symbolic link that does not resolve to an existing file, an empty file shall be created such that path resolves to the newly created file. If O_NOCLOBBER is set and O_CREAT is not set, the result is undefined.

SEE ALSO

chmod , close , creat , dirfd , dup , exec , fcntl , fdopendir , link , lseek , mkdtemp , mknod , read , symlink , umask , unlockpt , write

XBD 11. General Terminal Interface , <fcntl.h> , <sys/stat.h> , <sys/types.h>

CHANGE HISTORY

First released in Issue 1. Derived from Issue 1 of the SVID.

Issue 5

The DESCRIPTION is updated for alignment with the POSIX Realtime Extension and the POSIX Threads Extension.

Large File Summit extensions are added.

Issue 6

In the SYNOPSIS, the optional include of the <sys/types.h> header is removed.

The following new requirements on POSIX implementations derive from alignment with the Single UNIX Specification:

• The requirement to include <sys/types.h> has been removed. Although <sys/types.h> was required for conforming implementations of previous POSIX specifications, it was not required for UNIX applications.

• In the DESCRIPTION, O_CREAT is amended to state that the group ID of the file is set to the group ID of the file's parent directory or to the effective group ID of the process. This is a FIPS requirement.

• In the DESCRIPTION, text is added to indicate setting of the offset maximum in the open file description. This change is to support large files.

• In the ERRORS section, the [EOVERFLOW] condition is added. This change is to support large files.

• The [ENXIO] mandatory error condition is added.

• The [EINVAL], [ENAMETOOLONG], and [ETXTBSY] optional error conditions are added.

The DESCRIPTION and ERRORS sections are updated so that items related to the optional XSI STREAMS Option Group are marked.

The following changes were made to align with the IEEE P1003.1a draft standard:

• An explanation is added of the effect of the O_CREAT and O_EXCL flags when the path refers to a symbolic link.

• The [ELOOP] optional error condition is added.

The normative text is updated to avoid use of the term "must" for application requirements.

The DESCRIPTION of O_EXCL is updated in response to IEEE PASC Interpretation 1003.1c #48.

Issue 7

Austin Group Interpretations 1003.1-2001 #113 and #143 are applied.

Austin Group Interpretation 1003.1-2001 #144 is applied, adding the O_TTY_INIT flag.

Austin Group Interpretation 1003.1-2001 #171 is applied, adding support to set the FD_CLOEXEC flag atomically at open(), and adding the F_DUPFD_CLOEXEC flag.

SD5-XBD-ERN-4 is applied, changing the definition of the [EMFILE] error.

This page is revised and the openat() function is added from The Open Group Technical Standard, 2006, Extended API Set Part 2.

Functionality relating to the XSI STREAMS option is marked obsolescent.

Changes are made related to support for finegrained timestamps.

Changes are made to allow a directory to be opened for searching.

POSIX.1-2008, Technical Corrigendum 1, XSH/TC1-2008/0418 [292], XSH/TC1-2008/0419 [141], XSH/TC1-2008/0420 [461], XSH/TC1-2008/0421 [390], XSH/TC1-2008/0422 [146], XSH/TC1-2008/0423 [324], XSH/TC1-2008/0424 [292], XSH/TC1-2008/0425 [278], XSH/TC1-2008/0426 [278], XSH/TC1-2008/0427 [291], and XSH/TC1-2008/0428 [307] are applied.

POSIX.1-2008, Technical Corrigendum 2, XSH/TC2-2008/0235 [873], XSH/TC2-2008/0236 [835], XSH/TC2-2008/0237 [847], XSH/TC2-2008/0238 [817], XSH/TC2-2008/0239 [835], XSH/TC2-2008/0240 [847], XSH/TC2-2008/0241 [822], XSH/TC2-2008/0242 [817], and XSH/TC2-2008/0243 [943] are applied.

Issue 8

Austin Group Defect 251 is applied, encouraging implementations to disallow the creation of filenames containing any bytes that have the encoded value of a <newline> character.

Austin Group Defect 293 is applied, adding the [EILSEQ] error.

Austin Group Defects 658 and 1665 are applied, restricting the allowed behaviors when O_EXEC is used on a directory, or O_SEARCH on a non-directory file, or O_RDWR on a FIFO, so that the requirements for O_EXCL still apply.

Austin Group Defect 1016 is applied, changing the FUTURE DIRECTIONS section.

Austin Group Defect 1151 is applied, changing the description of O_TTY_INIT to include requirements relating to the winsize structure.

Austin Group Defect 1318 is applied, adding FD_CLOFORK and O_CLOFORK.

Austin Group Defect 1330 is applied, removing obsolescent interfaces.

Austin Group Defect 1466 is applied, changing the terminology used for pseudo-terminal devices.