The Open Group Base Specifications Issue 7, 2018 edition
IEEE Std 1003.1-2017 (Revision of IEEE Std 1003.1-2008)
Copyright © 2001-2018 IEEE and The Open Group

NAME

uniq - report or filter out repeated lines in a file

SYNOPSIS

uniq [-c|-d|-u] [-f fields] [-s char] [input_file [output_file]]

DESCRIPTION

The uniq utility shall read an input file comparing adjacent lines, and write one copy of each input line on the output. The second and succeeding copies of repeated adjacent input lines shall not be written. The trailing <newline> of each line in the input shall be ignored when doing comparisons.

Repeated lines in the input shall not be detected if they are not adjacent.

OPTIONS

The uniq utility shall conform to XBD Utility Syntax Guidelines , except that '+' may be recognized as an option delimiter as well as '-'.

The following options shall be supported:

-c
Precede each output line with a count of the number of times the line occurred in the input.
-d
Suppress the writing of lines that are not repeated in the input.
-f  fields
Ignore the first fields fields on each input line when doing comparisons, where fields is a positive decimal integer. A field is the maximal string matched by the basic regular expression:
[[:blank:]]*[^[:blank:]]*

If the fields option-argument specifies more fields than appear on an input line, a null string shall be used for comparison.

-s  chars
Ignore the first chars characters when doing comparisons, where chars shall be a positive decimal integer. If specified in conjunction with the -f option, the first chars characters after the first fields fields shall be ignored. If the chars option-argument specifies more characters than remain on an input line, a null string shall be used for comparison.
-u
Suppress the writing of lines that are repeated in the input.

OPERANDS

The following operands shall be supported:

input_file
A pathname of the input file. If the input_file operand is not specified, or if the input_file is '-', the standard input shall be used.
output_file
A pathname of the output file. If the output_file operand is not specified, the standard output shall be used. The results are unspecified if the file named by output_file is the file named by input_file.

STDIN

The standard input shall be used only if no input_file operand is specified or if input_file is '-'. See the INPUT FILES section.

INPUT FILES

The input file shall be a text file.

ENVIRONMENT VARIABLES

The following environment variables shall affect the execution of uniq:

LANG
Provide a default value for the internationalization variables that are unset or null. (See XBD Internationalization Variables for the precedence of internationalization variables used to determine the values of locale categories.)
LC_ALL
If set to a non-empty string value, override the values of all the other internationalization variables.
LC_CTYPE
Determine the locale for the interpretation of sequences of bytes of text data as characters (for example, single-byte as opposed to multi-byte characters in arguments and input files) and which characters constitute a <blank> in the current locale.
LC_MESSAGES
Determine the locale that should be used to affect the format and contents of diagnostic messages written to standard error.
NLSPATH
[XSI] [Option Start] Determine the location of message catalogs for the processing of LC_MESSAGES. [Option End]

ASYNCHRONOUS EVENTS

Default.

STDOUT

The standard output shall be used if no output_file operand is specified, and shall be used if the output_file operand is '-' and the implementation treats the '-' as meaning standard output. Otherwise, the standard output shall not be used. See the OUTPUT FILES section.

STDERR

The standard error shall be used only for diagnostic messages.

OUTPUT FILES

If the -c option is specified, the output file shall be empty or each line shall be of the form:

"%d %s", <number of duplicates>, <line>

otherwise, the output file shall be empty or each line shall be of the form:

"%s", <line>

EXTENDED DESCRIPTION

None.

EXIT STATUS

The following exit values shall be returned:

 0
The utility executed successfully.
>0
An error occurred.

CONSEQUENCES OF ERRORS

Default.


The following sections are informative.

APPLICATION USAGE

If the collating sequence of the current locale has a total ordering of all characters, the sort utility can be used to cause repeated lines to be adjacent in the input file. If the collating sequence does not have a total ordering of all characters, the sort utility should still do this but it might not. To ensure that all duplicate lines are eliminated, and have the output sorted according the collating sequence of the current locale, applications should use:

LC_ALL=C sort -u | sort

instead of:

sort | uniq

To remove duplicate lines based on whether they collate equally instead of whether they are identical, applications should use:

sort -u

instead of:

sort | uniq

When using uniq to process pathnames, it is recommended that LC_ALL, or at least LC_CTYPE and LC_COLLATE, are set to POSIX or C in the environment, since pathnames can contain byte sequences that do not form valid characters in some locales, in which case the utility's behavior would be undefined. In the POSIX locale each byte is a valid single-byte character, and therefore this problem is avoided.

EXAMPLES

The following input file data (but flushed left) was used for a test series on uniq:

#01 foo0 bar0 foo1 bar1
#02 bar0 foo1 bar1 foo1
#03 foo0 bar0 foo1 bar1
#04
#05 foo0 bar0 foo1 bar1
#06 foo0 bar0 foo1 bar1
#07 bar0 foo1 bar1 foo0

What follows is a series of test invocations of the uniq utility that use a mixture of uniq options against the input file data. These tests verify the meaning of adjacent. The uniq utility views the input data as a sequence of strings delimited by '\n'. Accordingly, for the fieldsth member of the sequence, uniq interprets unique or repeated adjacent lines strictly relative to the fields+1th member.

  1. This first example tests the line counting option, comparing each line of the input file data starting from the second field:

    uniq -c -f 1 uniq_0I.t
        1 #01 foo0 bar0 foo1 bar1
        1 #02 bar0 foo1 bar1 foo1
        1 #03 foo0 bar0 foo1 bar1
        1 #04
        2 #05 foo0 bar0 foo1 bar1
        1 #07 bar0 foo1 bar1 foo0
    
    

    The number '2', prefixing the fifth line of output, signifies that the uniq utility detected a pair of repeated lines. Given the input data, this can only be true when uniq is run using the -f 1 option (which shall cause uniq to ignore the first field on each input line).

  2. The second example tests the option to suppress unique lines, comparing each line of the input file data starting from the second field:

    uniq -d -f 1 uniq_0I.t
    #05 foo0 bar0 foo1 bar1
    
    
  3. This test suppresses repeated lines, comparing each line of the input file data starting from the second field:

    uniq -u -f 1 uniq_0I.t
    #01 foo0 bar0 foo1 bar1
    #02 bar0 foo1 bar1 foo1
    #03 foo0 bar0 foo1 bar1
    #04
    #07 bar0 foo1 bar1 foo0
    
    
  4. This suppresses unique lines, comparing each line of the input file data starting from the third character:

    uniq -d -s 2 uniq_0I.t
    
    

    In the last example, the uniq utility found no input matching the above criteria.

RATIONALE

Some historical implementations have limited lines to be 1080 bytes in length, which does not meet the implied {LINE_MAX} limit.

Earlier versions of this standard allowed the - number and + number options. These options are no longer specified by POSIX.1-2017 but may be present in some implementations.

FUTURE DIRECTIONS

None.

SEE ALSO

comm, sort

XBD Environment Variables, Utility Syntax Guidelines

CHANGE HISTORY

First released in Issue 2.

Issue 6

The obsolescent SYNOPSIS and associated text are removed.

The normative text is reworded to avoid use of the term "must" for application requirements.

IEEE Std 1003.1-2001/Cor 1-2002, item XCU/TC1/D6/40 is applied, adding LC_COLLATE to the ENVIRONMENT VARIABLES section, and changing "the application shall ensure that" in the OUTPUT FILES section.

Issue 7

Austin Group Interpretation 1003.1-2001 #027 is applied, clarifying that '+' may be recognized as an option delimiter in the OPTIONS section.

Austin Group Interpretation 1003.1-2001 #092 is applied.

Austin Group Interpretation 1003.1-2001 #133 is applied, clarifying the behavior of the trailing <newline>.

SD5-XCU-ERN-97 is applied, updating the SYNOPSIS.

SD5-XCU-ERN-141 is applied, updating the EXAMPLES section.

POSIX.1-2008, Technical Corrigendum 2, XCU/TC2-2008/0199 [963] and XCU/TC2-2008/0200 [663] are applied.

End of informative text.

 

return to top of page

UNIX ® is a registered Trademark of The Open Group.
POSIX ™ is a Trademark of The IEEE.
Copyright © 2001-2018 IEEE and The Open Group, All Rights Reserved
[ Main Index | XBD | XSH | XCU | XRAT ]