The Open Group Base Specifications Issue 8
IEEE Std 1003.1-2024
Copyright © 2001-2024 The IEEE and The Open Group

NAME

netinet/in.h — Internet address family

SYNOPSIS

#include <netinet/in.h>

DESCRIPTION

The <netinet/in.h> header shall define the following types:

in_port_t
Equivalent to the type uint16_t as described in <inttypes.h>.
in_addr_t
Equivalent to the type uint32_t as described in <inttypes.h>.

The <netinet/in.h> header shall define the sa_family_t type as described in <sys/socket.h>.

The <netinet/in.h> header shall define the uint8_t and uint32_t types as described in <inttypes.h>. Inclusion of the <netinet/in.h> header may also make visible all symbols from <inttypes.h> and <sys/socket.h>.

The <netinet/in.h> header shall define the in_addr structure, which shall include at least the following member:

in_addr_t  s_addr

The <netinet/in.h> header shall define the sockaddr_in structure, which shall include at least the following members:

sa_family_t     sin_family   AF_INET.
in_port_t       sin_port     Port number.
struct in_addr  sin_addr     IP address.

The sin_port and sin_addr members shall be in network byte order. If the sin_port value passed to bind() is zero, the port number bound to the socket shall be one chosen by the implementation from an implementation-defined port range to produce an unused local address.

The sockaddr_in structure is used to store addresses for the Internet address family. Pointers to this type shall be cast by applications to struct sockaddr * for use with socket functions.

[IP6] [Option Start] The <netinet/in.h> header shall define the in6_addr structure, which shall include at least the following member:

uint8_t s6_addr[16]

This array is used to contain a 128-bit IPv6 address, stored in network byte order.

The <netinet/in.h> header shall define the sockaddr_in6 structure, which shall include at least the following members:

sa_family_t      sin6_family    AF_INET6.
in_port_t        sin6_port      Port number.
uint32_t         sin6_flowinfo  IPv6 traffic class and flow information.
struct in6_addr  sin6_addr      IPv6 address.
uint32_t         sin6_scope_id  Set of interfaces for a scope.

The sockaddr_in6 structure shall not include any additional members which have a floating-point type if an object of that type with an all-bits-zero representation does not have the value 0.0. [Option End]
[IP6 MX] [Option Start] Implementations that define __STDC_IEC_559__ are required to treat the all-zero bit pattern for a floating point object as a representation of 0.0, and may therefore have floating-point type members. [Option End]

[IP6] [Option Start] The sin6_port and sin6_addr members shall be in network byte order. If the sin6_port value passed to bind() is zero, the port number bound to the socket shall be one chosen by the implementation from an implementation-defined port range to produce an unused local address.

Prior to calling a function in this standard which reads values from a sockaddr_in6 structure (for example, bind() or connect()), the application shall ensure that all members of the structure, including any additional non-standard members, if any, are initialized. If the sockaddr_in6 structure has a non-standard member, and that member has a value other than the value that would result from default initialization, the behavior of any function in this standard that reads values from the sockaddr_in6 structure is implementation-defined. All functions in this standard that return data in a sockaddr_in6 structure (for example, getaddrinfo() or accept()) shall initialize the structure in a way that meets the above requirements, and shall ensure that each non-standard member, if any, has a value that produces the same behavior as default initialization would in all functions in this standard which read values from a sockaddr_in6 structure.

The sin6_scope_id field is a 32-bit integer that identifies a set of interfaces as appropriate for the scope of the address carried in the sin6_addr field. For a link scope sin6_addr, the application shall ensure that sin6_scope_id is a link index. For a site scope sin6_addr, the application shall ensure that sin6_scope_id is a site index. The mapping of sin6_scope_id to an interface or set of interfaces is implementation-defined.

The <netinet/in.h> header shall declare the following external variable:

const struct in6_addr in6addr_any

This variable is initialized by the system to contain the wildcard IPv6 address. The <netinet/in.h> header also defines the IN6ADDR_ANY_INIT macro. This macro shall be constant at compile time and can be used to initialize a variable of type struct in6_addr to the IPv6 wildcard address.

The <netinet/in.h> header shall declare the following external variable:

const struct in6_addr in6addr_loopback

This variable is initialized by the system to contain the loopback IPv6 address. The <netinet/in.h> header also defines the IN6ADDR_LOOPBACK_INIT macro. This macro shall be constant at compile time and can be used to initialize a variable of type struct in6_addr to the IPv6 loopback address.

The <netinet/in.h> header shall define the ipv6_mreq structure, which shall include at least the following members:

struct in6_addr  ipv6mr_multiaddr  IPv6 multicast address.
unsigned         ipv6mr_interface  Interface index.
[Option End]

The <netinet/in.h> header shall define the following symbolic constants for use as values of the level argument of getsockopt() and setsockopt():

IPPROTO_IP
Internet protocol.
IPPROTO_IPV6
[IP6] [Option Start] Internet Protocol Version 6. [Option End]
IPPROTO_ICMP
Control message protocol.
IPPROTO_RAW
[RS] [Option Start] Raw IP Packets Protocol. [Option End]
IPPROTO_TCP
Transmission control protocol.
IPPROTO_UDP
User datagram protocol.

The <netinet/in.h> header shall define the following symbolic constant for use as a local address in the structure passed to bind():

INADDR_ANY
IPv4 wildcard address.

The <netinet/in.h> header shall define the following symbolic constant for use as a destination address in the structures passed to connect(), sendmsg(), and sendto():

INADDR_BROADCAST
IPv4 broadcast address.

The <netinet/in.h> header shall define the following symbolic constant, with the value specified, to help applications declare buffers of the proper size to store IPv4 addresses in string form:

INET_ADDRSTRLEN
16. Length of the string form for IP.

The htonl(), htons(), ntohl(), and ntohs() functions shall be available as described in <arpa/inet.h>. Inclusion of the <netinet/in.h> header may also make visible all symbols from <arpa/inet.h>.

[IP6] [Option Start] The <netinet/in.h> header shall define the following symbolic constant, with the value specified, to help applications declare buffers of the proper size to store IPv6 addresses in string form:

INET6_ADDRSTRLEN
46. Length of the string form for IPv6.
[Option End]

[IP6] [Option Start] The <netinet/in.h> header shall define the following symbolic constants, with distinct integer values, for use in the option_name argument in the getsockopt() or setsockopt() functions at protocol level IPPROTO_IPV6:

IPV6_JOIN_GROUP
Join a multicast group.
IPV6_LEAVE_GROUP
Quit a multicast group.
IPV6_MULTICAST_HOPS

Multicast hop limit.
IPV6_MULTICAST_IF
Interface to use for outgoing multicast packets.
IPV6_MULTICAST_LOOP

Multicast packets are delivered back to the local application.
IPV6_UNICAST_HOPS
Unicast hop limit.
IPV6_V6ONLY
Restrict AF_INET6 socket to IPv6 communications only.

The <netinet/in.h> header shall define the following macros that test for special IPv6 addresses. Each macro is of type int and takes a single argument of type const struct in6_addr *:

IN6_IS_ADDR_UNSPECIFIED

Unspecified address.
IN6_IS_ADDR_LOOPBACK

Loopback address.
IN6_IS_ADDR_MULTICAST

Multicast address.
IN6_IS_ADDR_LINKLOCAL

Unicast link-local address.
IN6_IS_ADDR_SITELOCAL

Unicast site-local address.
IN6_IS_ADDR_V4MAPPED

IPv4 mapped address.
IN6_IS_ADDR_V4COMPAT

IPv4-compatible address.
IN6_IS_ADDR_MC_NODELOCAL

Multicast node-local address.
IN6_IS_ADDR_MC_LINKLOCAL

Multicast link-local address.
IN6_IS_ADDR_MC_SITELOCAL

Multicast site-local address.
IN6_IS_ADDR_MC_ORGLOCAL

Multicast organization-local address.
IN6_IS_ADDR_MC_GLOBAL

Multicast global address.
[Option End]

The following sections are informative.

APPLICATION USAGE

Although applications are required to initialize all members (including any non-standard ones) of a sockaddr_in6 structure, the same is not required for the sockaddr_in structure, since historically many applications only initialized the standard members. Despite this, applications are encouraged to initialize sockaddr_in structures in a manner similar to the required initialization of sockaddr_in6 structures.

The requirement that sockaddr_in6 does not include any additional members which have a floating-point type if an object of that type with an all-bits-zero representation does not have the value 0.0 is to allow initialization of a sockaddr_in6 structure using:

struct sockaddr_in6 sa;
memset(&sa, 0, sizeof sa);

as an alternative to the use of default initialization.

RATIONALE

The INADDR_ANY and INADDR_BROADCAST values are byte-order-neutral and thus their byte order is not specified. Many implementations have additional constants as extensions, such as INADDR_LOOPBACK, that are not byte-order-neutral. Traditionally, these constants are in host byte order, requiring the use of htonl() when using them in a sockaddr_in structure.

FUTURE DIRECTIONS

None.

SEE ALSO

4.13 Host and Network Byte Orders , <arpa/inet.h> , <inttypes.h> , <sys/socket.h>

XSH bind , connect , getsockopt , htonl , sendmsg , sendto , setsockopt

CHANGE HISTORY

First released in Issue 6. Derived from the XNS, Issue 5.2 specification.

The sin_zero member was removed from the sockaddr_in structure as per The Open Group Base Resolution bwg2001-004.

IEEE Std 1003.1-2001/Cor 1-2002, item XBD/TC1/D6/12 is applied, adding const qualifiers to the in6addr_any and in6addr_loopback external variables.

IEEE Std 1003.1-2001/Cor 2-2004, item XBD/TC2/D6/22 is applied, making it clear which structure members are in network byte order.

Issue 7

This reference page is clarified with respect to macros and symbolic constants.

POSIX.1-2008, Technical Corrigendum 1, XBD/TC1-2008/0061 [355] is applied.

POSIX.1-2008, Technical Corrigendum 2, XBD/TC2-2008/0065 [934], XBD/TC2-2008/0066 [952], XBD/TC2-2008/0067 [934], and XBD/TC2-2008/0068 [952] are applied.

Issue 8

Austin Group Defect 940 is applied, requiring that the sockaddr_in6 structure does not include any additional members which have a floating-point type if an object of that type with an all-bits-zero representation does not have the value 0.0.

Austin Group Defect 1068 is applied, specifying how a sin_port or sin6_port value of zero is handled by bind().

Austin Group Defect 1299 is applied, changing <netinet_in.h> to <netinet/in.h>.

End of informative text.

 

return to top of page

UNIX® is a registered Trademark of The Open Group.
POSIX™ is a Trademark of The IEEE.
Copyright © 2001-2024 The IEEE and The Open Group, All Rights Reserved
[ Main Index | XBD | XSH | XCU | XRAT ]