The Open Group Base Specifications Issue 8
IEEE Std 1003.1-2024
Copyright © 2001-2024 The IEEE and The Open Group

NAME

abort — generate an abnormal process abort

SYNOPSIS

#include <stdlib.h>

_Noreturn void abort(void);

DESCRIPTION

[CX] [Option Start] The functionality described on this reference page is aligned with the ISO C standard. Any conflict between the requirements described here and the ISO C standard is unintentional. This volume of POSIX.1-2024 defers to the ISO C standard. [Option End]

The abort() function shall cause abnormal process termination to occur, unless a SIGABRT signal that it generates is caught and the signal handler does not return.

[CX] [Option Start] The abnormal termination processing shall include the default actions defined for SIGABRT and may include an attempt to effect fclose() on all open streams. [Option End]

The SIGABRT signal shall be sent to the calling [CX] [Option Start]  thread [Option End]  as if by means of raise() with the argument SIGABRT. [CX] [Option Start] If this signal does not terminate the process (for example, if the signal is caught and the handler returns), abort() may change the disposition of SIGABRT to SIG_DFL and send the signal (in the same way) again. If a second signal is sent and it does not terminate the process, the behavior is unspecified, except that the abort() call shall not return. [Option End]

[CX] [Option Start] The status made available to wait(), waitid(), or waitpid() by abort() shall be that of a process terminated by the SIGABRT signal. [Option End] The abort() function shall override blocking or ignoring the SIGABRT signal.

RETURN VALUE

The abort() function shall not return.

ERRORS

No errors are defined.


The following sections are informative.

EXAMPLES

None.

APPLICATION USAGE

Catching the signal is intended to provide the application developer with a portable means to abort processing, free from possible interference from any implementation-supplied functions.

RATIONALE

Historically, abort() has been implemented by calling other signal manipulation functions such as raise(), sigaction(), and pthread_sigmask(). This means that its operation can be affected by concurrent actions in other threads. For example, if abort() attempts to terminate the process by calling sigaction() to change the disposition for SIGABRT to SIG_DFL and then calling raise(), another thread could change the disposition in between those two calls, resulting in the process not being terminated. If this happens, the only requirement is that abort() does not return. An implementation could call those functions in a loop (which could in theory then execute indefinitely), or could terminate the process by calling _exit() (which would ensure termination but result in the wrong wait status). To avoid these issues, implementations are encouraged to implement abort() in a manner such that its operation cannot be affected by concurrent actions in other threads. For example, it could first halt the execution of all other threads, or it could terminate the process using a "terminate as if by a signal" system call instead of by raising (a second) SIGABRT.

The ISO/IEC 9899:1999 standard required (and the current standard still requires) the abort() function to be async-signal-safe. Since POSIX.1-2024 defers to the ISO C standard, this required a change to the DESCRIPTION from "shall include the effect of fclose()" to "may include an attempt to effect fclose()."

The revised wording permits some backwards-compatibility and avoids a potential deadlock situation.

The Open Group Base Resolution bwg2002-003 is applied, removing the following XSI shaded paragraph from the DESCRIPTION:

"On XSI-conformant systems, in addition the abnormal termination processing shall include the effect of fclose() on message catalog descriptors."

There were several reasons to remove this paragraph:

FUTURE DIRECTIONS

A future version of this standard may require abort() to be implemented in a manner such that its operation cannot be affected by concurrent actions in other threads.

SEE ALSO

exit , kill , raise , signal , wait , waitid

XBD <stdlib.h>

CHANGE HISTORY

First released in Issue 1. Derived from Issue 1 of the SVID.

Issue 6

Extensions beyond the ISO C standard are marked.

Changes are made to the DESCRIPTION for alignment with the ISO/IEC 9899:1999 standard.

The Open Group Base Resolution bwg2002-003 is applied.

IEEE Std 1003.1-2001/Cor 1-2002, item XSH/TC1/D6/10 is applied, changing the DESCRIPTION of abnormal termination processing and adding to the RATIONALE section.

IEEE Std 1003.1-2001/Cor 2-2004, item XSH/TC2/D6/9 is applied, changing "implementation-defined functions" to "implementation-supplied functions" in the APPLICATION USAGE section.

Issue 8

Austin Group Defect 906 is applied, clarifying how the behavior of abort() may be affected by concurrent actions in other threads.

Austin Group Defect 1302 is applied, aligning this function with the ISO/IEC 9899:2018 standard.

End of informative text.

 

return to top of page

UNIX® is a registered Trademark of The Open Group.
POSIX™ is a Trademark of The IEEE.
Copyright © 2001-2024 The IEEE and The Open Group, All Rights Reserved
[ Main Index | XBD | XSH | XCU | XRAT ]