The msgfmt utility shall accept portable messages object source files (dot-po files) in the following format.
A dot-po file contains zero or more lines, with each non-blank line containing a comment, a statement, or a statement
continuation. A comment has an unquoted <number-sign> ('#') as the first non-<blank> character and ends with
the next <newline> character. A statement continuation is a double-quoted string on a line by itself, optionally preceded
and/or followed by <blank> characters, and the string shall be concatenated with the string on the previous statement line.
If a comment occurs between a statement and a statement continuation, the behavior is unspecified. All other comments, except for
comments beginning with <number-sign><comma> ("#,"), and blank lines shall be ignored.
The format of a statement is:
directive value
The directive starts at the first non-<blank> character of the line and is separated from the value by one
or more <blank> characters. The value consists of a double-quoted string optionally followed by <blank>
characters. Zero or more statement continuation lines (see above) can follow the statement. The following directives shall be
supported:
domain domainname
msgid message_identifier
msgid_plural untranslated_string_plural
msgstr message_string
msgstr[index] message_string
A dot-po file consists of zero or more sections. Each section specifies the messages to be processed in a domain. The first
directive in each section shall be a domain directive (except for the first section which shall behave as if
domain "messages"
had been specified if the first directive is not a domain directive).
The behavior of the domain directive is affected by the options used. See OPTIONS for the behavior when the -o
option is specified. If the -o option is not specified, all data obtained from the non-domain directives in a dot-po
section shall be output to the messages object file named domainname.mo when the -S option is specified. When
the -S option is not specified, it is implementation-defined whether domainname or domainname.mo is
used.
If multiple domain directives specify the same domainname, the sections shall be processed as if there was only
one section that starts with a domain domainname statement which contained the statements of the sections, in the
same order, excluding all but the first domain domainname statement.
Within each section, there can be a header. A header is identified by having a msgid directive with the empty string
("") as the message_identifier immediately followed by a statement containing a msgstr directive. The
message_string in this msgstr statement in a header shall be treated specially. If message_string contains a
specification of the form:
"nplurals=count; plural=expression"
then count indicates the number of plural forms for messages in that domain, and expression is a C-language
expression that evaluates to an unsigned integer value which determines the msgstr[index] directive to be
used. The value of expression is used as the index value. The variable n in expression is assigned the value
of the n argument to the ngettext(), ngettext_l(), dngettext(), dngettext_l(), dcngettext(), and
dcngettext_l() functions or of the n operand of the ngettext utility before expression is evaluated. The application shall ensure that
expression evaluates to a non-negative value less than count for all n that can be supplied by the
aforementioned functions and utility.
If message_string in the header contains a specification of the form:
"charset=codeset"
then codeset indicates the codeset to be used to encode the message strings in this section's domain (overriding
LC_CTYPE ). If the output string's codeset is different from the message string's codeset, codeset conversion from the
message string's codeset to the output string's codeset shall be performed by the gettext family of functions and by the
gettext and ngettext utilities. See
XSH gettext and gettext . The output string's codeset shall be determined by the current or
specified locale's codeset.
- Note:
- It is the responsibility of translators to ensure that the characters they enter into message strings in a dot-po file are
encoded in the codeset specified in the header.
If a header is present in a section, the application shall ensure that the header is provided by the first msgid
directive in that section.
After the header, if present, zero or more messages are identified by a msgid directive with a message_identifier
that is not an empty string. Each of these directives start a subsection that is used to get a translated message from the
gettext family of functions and from the gettext and ngettext utilities. If the message_identifier string is the string identified by the
gettext family of functions msgid argument or by the gettext and
ngettext utility msgid operand, this subsection specifies how that
translation is to be processed.
If there is only a singular form for the given message_identifier, the application shall ensure that the statement
containing the msgid directive is immediately followed by a msgstr directive.
If there are plural forms for the given message_identifier and the header for this section exists and contains an
"nplurals=count; plural=expression"
specification, the application shall ensure that the statement containing the msgid directive is immediately followed by
a msgid_plural directive and that each statement containing a msgid_plural directive is followed by count
statements containing msgstr[index] directives, starting with msgstr[0] and ending with
msgstr[count-1] in increasing order, with no duplicate index values. If a header for this section does not
exist or does not contain an
"nplurals=count; plural=expression"
specification, the application shall ensure that no msgid_plural or msgstr[index] directives are
used in this section.
For example, if the header's message_string contains the specification:
"nplurals=2; plural= n == 1 ? 0 : 1"
there are two forms in the domain; msgstr[0] is used if n is equal to 1, otherwise msgstr[1] is used. For
another example, if the header's message_string contains:
"nplurals=3; plural= n == 1 ? 0 : n == 2 ? 1 : 2"
there are three forms in the domain; msgstr[0] is used if n is equal to 1, msgstr[1] is used if n is
equal to 2, otherwise msgstr[2] is used.
C-language escape sequences in strings shall be processed as specified for character string literals in the ISO C standard,
except that universal-character-name escape sequences need not be supported.
Comments in a dot-po file can be in one of the following formats:
#: reference
#. utility-added-comments
#, flag
#translator-comments (where translator-comments does not begin with '.', ':' or ',')
A #: reference comment indicates the location(s) of the msgid string in the source files, in
pathname1:linenumber1 [pathname2:linenumber2 ... ]
format. They can be added, as might "#." prefixed additional comments of unspecified format, by the xgettext utility. All comments that do not begin with "#," are informative only
and shall be silently ignored by the msgfmt utility. In "#," comments the following values for flag can be
specified:
- fuzzy
- This flag indicates that the msgstr string might not be a correct translation at this point in time. Only the translator
can judge if the translation requires further modification or is acceptable as is. Once satisfied with the translation, the
translator should remove this fuzzy flag. If this flag is specified, the msgfmt utility shall not generate the entry
for the next following msgid in the output message catalog, unless the -f option is specified. If other flag comments
are specified between fuzzy and the msgid, the behavior is unspecified.
- c-format
- no-c-format
- The c-format flag indicates that the next following msgid string contains a printf() format string. When the c-format flag is given and the -c and
-v options are specified, the msgfmt utility shall perform additional tests to check the validity of the translation
(see OPTIONS); these additional tests may also be performed if neither c-format nor no-c-format is given. When the
no-c-format flag is given for a string, no additional checks shall be performed for the string. When both the
c-format and the no-c-format flags are given, the last flag specified takes precedence.
In this example, module1.po and module2.po are portable messages object source files.
$ cat module1.po
# default domain "messages"
msgid ""
msgstr "charset=utf-8"
msgid "msg 1"
msgstr "msg 1 translation"
#
domain "help_domain"
msgid ""
msgstr "charset=utf-8"
msgid "help 2"
msgstr "help 2 translation"
#
domain "error_domain"
msgid ""
msgstr "charset=utf-8"
msgid "error 3"
msgstr "error 3 translation"
$ cat module2.po
# default domain "messages"
msgid ""
msgstr "charset=utf-8"
msgid "mesg 4"
msgstr "mesg 4 translation"
#
domain "error_domain"
msgid ""
msgstr "charset=utf-8"
#, c-format
msgid "error 5 %s"
msgstr "error 5 translation %s"
#
domain "window_domain"
msgid ""
msgstr "charset=utf-8"
msgid "window 6"
msgstr "window 6 translation"
$ cat module3.po
# default domain "messages"
# header will be used for the whole output file in the third example
msgid ""
msgstr "charset=utf-8"
msgid "info 0"
msgstr "info 0 translation"
$ cat opt_debug.po
#
domain "debug_domain"
msgid "debug 8"
msgstr "debug 8 translation"
The following command will produce the output files messages.mo, help_domain.mo, and error_domain.mo:
$ msgfmt -S module1.po
The following command will produce the output files messages.mo, help_domain.mo, error_domain.mo, and
window_domain.mo:
$ msgfmt -S module1.po module2.po
The following command will produce the output file hello.mo:
$ msgfmt -o hello.mo module3.po opt_debug.po
![[Option Start]](../images/opt-start.gif)
if NLSPATH is not set or the evaluation of NLSPATH
did not lead to a suitable messages object being found. ![[Option End]](../images/opt-end.gif)